e-Sense BrightSwitch

e-Sense BrightSwitch is a lighting control system where an integrated PIR sensor controls connected luminaires. BrightSwitch provides automatic ignition/extinguishing or dimming between high/low level that is controlled by presence or ambient light.

How e-Sense BrightSwitch works

BrightSwitch is a control system with a PIR-sensor that provides automatic on/off with presence detection and a lux threshold that prevents the sensor from reacting to presence if there is sufficient light in the room.

With the remote control the delay time can be set in fixed steps 5 seconds–60 minutes. Lux threshold prevents the sensor from reacting to presence if there is sufficient light in the room. Lux threshold can be set in three levels or with a manual setting of the current light level.

e-Sense Bright Switch with absence dampening is adapted to rooms that are used sparingly, e.g. copy, store, hallways or corridors. The lighting is at a constant low level (20%) to counteract the impression of a completely darkened room. When presence is detected, the light level is adjusted to 100 %. If you want to turn off the luminaire completely, this can be done centrally. Fittings are delivered with a delay time of 10 minutes and lux threshold deactivated. Settings for delay time and lux threshold is made with a remote control (accessory).

e-Sense BrightSwitch on/off

An integrated PIR sensor switches on and switches off one or more luminaires. The system allows for one master luminaire and up to five slave luminaires. With e-Sense BrightSwitch On/Off, the sensor switches on in response to movement, and then switches off after a set time using the relay. A lux threshold prevents detection if there is sufficient light in the room. Luminaires without adjustable ballasts. 

e-Sense BrightSwitch absence dimming

Using absence dimming, the fixture provides low-level light (approx. 20%). When motion is detected, the light level is adjusted up to 100%. After the last detected presence and set time delay, the fixture is adjusted back to a low level. A lux threshold prevents detection if there is sufficient light in the room. The luminaires are fitted with phase-pulse ballasts and are controlled by means of phase-pulse coupling.


Presence control

Lux threshold

Absence dimming

Remote control


Individual offices

Conference rooms



The luminaires are supplied with the switch-off time set to 10 minutes, and the lux level setting is disconnected. Adjustment of switch-off time and lux level is done using a remote control, which is supplied as an accessory.


BrightSwitch on/off  has an integrated PIR sensor with a relay terminal.

BrightSwitch Absence damping has an integrated PIR sensor with phase-pulse. 


Download brochure