INFO! Due to maintenance the access to the product catalogue may be unavailable approx. between June 8th 17:00 to June 9th 06:00 (CEST).

Multilume Hydro Robust G3Recessed

Multilume Hydro Robust is an impact-resistant anti-ligature luminaire with Delta louvre, designed for demanding environments.

Multilume Hydro G3 Robust recessed 600x600 delta white

Multilume Hydro G3 Robust Recessed Delta

Multilume Hydro Robust G3Recessed

Multilume Hydro Robust is an impact-resistant anti-ligature luminaire with Delta louvre, designed for demanding environments.

51.4 kg CO₂e 137 lm/W

Installation

Luminaire for recessed installation in suspended or fixed suspended ceilings. Unventilated or ventilated suspended ceilings. Safety torx. For detailed information, see the installation instructions.

Connection

For permanent connection in separate driver box. Snap-in terminal block 3x2.5 mm² (x2), through-wiring possible. 5x2.5 mm² (x2) for dimming. Can also be supplied with chassis-mounted snap-in connector in the driver where a T-splitter or mains cable and plug are possible. The luminaire body and driver are interconnected with a snap-in connector. Luminaire body Class III. The supplied driver must be connected to the protective earth. Luminaires with Tunable White (2700–6500K) and Tunable White Melanopic (1800/2700–6500K) are equipped with DALI Device Type 8 driver. CLO (Constant Light Output).

Design

Extruded aluminium luminaire body, made from 75% post-consumer recycled material. Die-cast aluminium corner fittings, made from post-consumer recycled material. Lacquered in white (RAL 9016 G40).

Light Distribution

Direct.

Light data

CCT, K:

3000 K, 4000 K. 2700-6500 K, 1800/2700-6500 K (TWM)

CRI/Rf:

80, 90

SDCM:

Lumen output:

2409-7208 lm

CLO:

100 000 h

Optics

Delta – micro-prism louvres made of acrylic (PMMA).

51.4kg CO₂e

(Based on 23356-20000)

Climate impact (GWP fossil) A1–A3 based on results from the EPD.

Made of recycled aluminium

The luminaire body is made of recycled aluminium, which consists of 75% post-consumer material (end-of-life scrap) from Europe. This aluminium (excluding extrusion) has a 71% lower climate impact compared to average primary aluminium from Europe (Source: European Aluminium). These calculations are based on the climate impact reported in the EPD compared to the average values.

High efficiency – precise light direction

The edge-lit diffuser, together with the specially etched surface of the louvre, directs the light exactly where it is needed – without light loss. The light distribution can be shaped with a high level of precision, minimising energy consumption without compromising on light comfort.

Made in Sweden

The product is manufactured in Fagerhult’s factory in Habo, Sweden. The production process has a low climate impact, using energy from 100% renewable sources. Local manufacturing ensures clean production, high quality, reduced transportation and good working conditions.