Multilume Hydro Robust G3Surface

Multilume Hydro Robust is an impact-resistant anti-ligature luminaire with Delta louvre, designed for demanding environments.

Multilume Hydro robust G3 surface 600x600 delta white
White RAL 9016
Multilume Hydro robust G3 surface 600x600 delta white Multilume Hydro Robust G3 surface Delta

Multilume Hydro Robust G3Surface

Multilume Hydro Robust is an impact-resistant anti-ligature luminaire with Delta louvre, designed for demanding environments.


Installation

Luminaire for surface-mounted ceiling installation. IP44, IK10. Security Torx. For detailed information, see the installation instructions. 

Connection

For permanent connection in separate driver box. Snap-in terminal block 3x2.5 mm² (x2), through-wiring possible. 5x2.5 mm² (x2) for dimming. The luminaire body and driver are interconnected with a quick connection system. Luminaire body Class III. The supplied driver must be connected to the protective earth. Luminaires with Tunable White (2700–6500K) and Tunable White Melanopic (1800/2700–6500K) are equipped with DALI Device Type 8 driver. CLO (Constant Light Output).

Design

Extruded aluminium luminaire body, made from 75% post-consumer recycled material and sheet steel. Die-cast aluminium corner fittings, made from post-consumer recycled material. Lacquered in white (RAL 9016 G40).


Light Distribution

Direct.

Light data

CCT, K:
3000 K, 4000 K. 2700-6500 K, 1800/2700-6500 K (TWM)
CRI/Rf:
80, 90
SDCM:
3
Lumen output:
2409-7208 lm
CLO:
100 000 h

Optics

Delta – micro-prism louvres made of acrylic (PMMA).

137lm/W

Energy efficiency from the most efficient article.

Read more about our products lifecycle

Made of recycled aluminium

The luminaire body is made of recycled aluminium, which consists of 75% post-consumer material (end-of-life scrap) from Europe. This aluminium (excluding extrusion) has a 71% lower climate impact compared to average primary aluminium from Europe (Source: European Aluminium). These calculations are based on the climate impact reported in the EPD compared to the average values.

High efficiency – precise light direction

The edge-lit diffuser, together with the specially etched surface of the louvre, directs the light exactly where it is needed – without light loss. The light distribution can be shaped with a high level of precision, minimising energy consumption without compromising on light comfort.

Made in Sweden

The product is manufactured in Fagerhult’s factory in Habo, Sweden. The production process has a low climate impact, using energy from 100% renewable sources. Local manufacturing ensures clean production, high quality, reduced transportation and good working conditions.


DALI/Phase pulse control

Combines digital DALI control with traditional phase control – a flexible solution that allows both precise dimming and easy installation.

On/Off

Simple control method where the lighting is turned on or off without dimming. For environments with basic lighting needs and clear control.

Articles

Configure your Multilume Hydro Robust G3

Adapt and optimise the luminaire in Fagerhult's configurator.

Need more information?

Download a collection of light data files to guide you in your decision.

Downloads

Multilume Hydro Robust G3 Surface

Documents

Open PDF

3D Models

Light data files

Manuals

Open PDF
Return to top