Aluflex 1224299 Aluflex 24299
A power supply panel with options for adding electrical, telecom, signal, data and gas outlets as needed. General lighting when used terminates the top edge of the panel from a design standpoint.
Designed for intensive care environments, the starting point is the basic duct, which can be extended in height using any number of additional ducts for electricity and gas. Sockets for voice and data communication are added as required. The panel can also accommodate an equipment rail and integrate general, reading or examination lighting. Aluflex 12 can be mounted horizontally or vertically.
Electrical cables and gas pipes can be connected in three ways; from the side via the panel’s end-cap, via holes in the bottom profile’s rear and from above via the supply duct. All electrical and gas outlet sockets are internally connected and routed to terminal blocks at the connection end.
Aluflex 12 is a group of ducts with the angled gas outlets forming the base. An unlimited number of intermediate ducts can then be added and finished with a straight sloping or round cover section or with a continuous luminaire installation on top. The gas duct can also be equipped with any model of equipment rail. The panels can be supplied in lengths up to 6200 mm without being joined.
Electrical socket outlets
Aluflex 12 is equipped with the specified number of heavy and low current outlet sockets. The outlet sockets are fitted in the equipment bracket, type click-fix, which is snapped onto the front edge of the bottom section. The front cover can be easily dismantled without affecting the installation in the panel. The panel can be equipped with different national standard outlet sockets.
End-caps can be used to terminate the panel.
All sections are built using extruded aluminium. The bottom and front section, used for outlet sockets, are available as standard in natural anodised or white anodised finishes (RAL 9010). Alternative colour finishes are available at an additional charge. The panel has a smooth external face that facilitates easy cleaning.
The outlets for medical gases are intended for hose connections from medical equipment installed on the equipment rail.
The panel can be equipped with general lighting through a continuous luminaire installation mounted on the top edge. The reflector directs the light asymmetrically (upwards/outwards) towards the ceiling providing the room with indirect light.
Aluflex is flexible healthcare solutions, suitable for ward, general and intensive care environments. The modular system consists of lower panels, interme- diate ducts and top panels, equipped with an optio- nal number of outlet...More about the family Aluflex