Notor 78

Installation

Designed for single or continuous installation via a wire pendent and special loops that give flexible c-c spacing. Special loops included in the delivery. Wires suspension are ordered separately. Can also be wall mounted with special bracket, see Accessories.

Connection

The start luminaire is supplied with 2,4 m mains cable excluding plug as standard. With additional numbers -448, -449 and -474 is the luminaire equipped with 2,4 mains cable, 3x1,0 mm² and earthed plug. The connecting mains cable comes out on the same side as the pull switch. The luminaire unit is equipped with a through-wiring cable (5x1.5 mm²) and a snap-in connection in each end cap. In a continuous installation, the luminaire row should always begin with a start luminaire.

Design

Body in white (RAL 9016) or natural anodised, extruded aluminium finish. Direct/indirect: the top is covered by an active film which generates a broad light pattern and which works as a dust cover.

Louvre

Delta – microprism louvre in acrylic (PMMA).

Reflector

The louvres act as reflectors.

Dimming

DALI/phase-pulse control as standard. Luminaires with DALI/phase pulse control have CLO (Constant Light Output) as standard.
Additional number -448, -449 and -474 is only available with single installation.
30/70, 70/30 contains 2 DALI drivers (requires 2 DALI addresses).
50/50 and Direct light distribution contains 1 DALI driver with 1200 mm, 2 DALI drivers with 2400 mm.
e-Sense Active – PIR sensor with presence and daylight control via DALI.

Organic Response – PIR sensor with presence and daylight control. All luminaires have master/slave functionality with IR communications.

Miscellaneous

CLO (Constant Light Output) maintains the correct light from the luminaire for the duration of its rated life.

To calculate how many luminaires and accessories you will need to complete a run, please use our configurator.