Configure

Pleiad G4 Wallwasher

An efficient, asymmetrical downlight for illuminating walls with a light that reaches all the way up to the corner of the ceiling. With several luminous fluxes and reflector options, G4 Wallwasher is also available with Tunable White and RGB/W.

Installation

Recessed mounting in unventilated or ventilated suspended ceilings. Separate driver and installation clip for easy and tool-free installation supplied as standard. An assembly plate must be used when mounting on soft tile ceilings, , see accessories. For detailed information, see the installation instructions.

Connection

Connection in separate driver box. Snap-in terminal block 3x1.5 mmm² (x2), onward connection possible. 5x1.5 mm² (x2) when dimming. Can also be supplied with chassis mounted snap-in connector in the ballast where a T-splitter or mains cable and plug are possible. The luminaire body and driver are interconnected with a snap-in connector.

Design

Luminaire body in cast aluminium and white PBT-plastic. Visible reflector ring in white PBT plastic (RAL 9003).

Reflector

Metallised PBT in bright and matt aluminium. The reflector has a protective coat of scratch-resistant clear lacquer.

Miscellaneous

The luminaire is supplied with dust protection over the light opening. IP 44 under a suspended ceiling, IP 20 above a suspended ceiling. Luminaire body Class III. The supplied driver must be connected to the protective earth. Luminaires with Tunable White (2700 – 6500 K) are equipped with driver DALI Device type 8. For loads in the suspended ceiling system, follow the selected suspended ceiling supplier’s recommendation. CLO (Constant Light Output) maintains the correct light from the luminaire for the duration of its rated life."

Media

Pleiad G4

Pleiad G4 is the latest evolution of Fagerhult's classic downlight series. Even more efficient. Even better visual comfort. Even quicker to install. Pleiad G4 simplifies and streamlines advanced lighting planning for entire...

More about the family Pleiad G4

Document

Dostosuj za Pomocą Konfiguracji Fagerhult

Dostosuj i zoptymalizuj oprawę w konfiguratorze Fagerhult. Na przykład można łatwo wybrać CRI, temperaturę barwową, optykę, przepływ światła, sterowanie i różne opcje połączeń. Wszystkie Twoje wybory są zapisywane w arkuszu danych produktu, który można pobrać wraz z unikalnymi plikami danych świetlnych.

  • Adapt and optimise the luminaire
  • Download unique data sheet and light data files
  • To order, contact your sales representative
Uruchom Konfigurator

Specification

Ładuję...

Filter

Name Description Art.no.
Name Description Art.no.
Mounting plateMounting plate41956
Input unit, TridonicDALI XC86132
no-image placeholder Mounting plate. Mounting plate HB. Adapted for downlights with recess dimensions Ø 16541655
Mounting plate and support bars625 mm41959
Mounting plate and support bars600 mm41958
Control panels, LunatoneDALI Switch Cross86354
WAGO connection cables, 3-wayLength 3.0 m with female and male connectors, 3x1,5 mm². Halogen free.91244
WAGO connection cables, 5-wayLength 3.0 m with female and male connectors, 5x1,5 mm². Halogen free.91243
Wieland connection cables, 3-wayLength 3.0 m with female and male connectors, 3x1,5 mm². Halogen free.92793
WAGO T-connectorWAGO T-Connector, 3-way, white91067
WAGO T-connectorWAGO T-connector, 5-way, 2 locking levers, blue88228
Wieland connection cables, 5-wayLength 3.0 m with female and male connectors, 5x1,5 mm². Halogen free.92799