emLED-sc

emLED-sc is an emergency lighting luminaire, for recessed or surface installation. External supply via central system.

Installation

Optional, either surface or recess mounted in ventilated and unventilated areas. c/c between securing holes is optional 38, 55, 60, 67 and 78 mm. When recessed the product supports a ceiling thickness of between 5 and 25 mm.

Connection

Phase, neutral conductors and possibly a protective earth. The detachable lower section housing the electronics and battery is connected where applicable to the terminal block in the luminaire body with a “plug-in” connection. Through-wiring of 2.5 mm cable possible (all positions). Cable entries fitted with blanking grommets on the top. Strain relief for movable cables with recess mounting supplied. Also prepared for a surface mounted mains cable. The luminaire is not intended for continual operation.

Design

Degree of protection IP 40 (with permanent installation), protection class II. Plastic parts of PC/ABS plastic. Recess mounting clips of stainless steel.

Miscellaneous

emLED-sc is vibration resistant. The product conforms to the requirements set out in IEC 60068-2-6 test FC and IEC 60068-2- 64 test FV.

emLED

Fagerhult’s emLED concept builds on a high intensity LED which is only used for emergency lighting. The LED almost never wears out since it is only used in emergency mode and when the test sequences are run. The concept...

More about the family emLED

Document

Specification

Ładuję...

Filter

Name Description Art.no.
Name Description Art.no.
Mounting plateMounting plate for soft tile ceiling, Ø 75, Ø 95, Ø 10741982