An asymmetrical downlight for lighting on walls with one light that reaches all the way to the ceiling edge. Also available with Tunable White for dynamic lighting.
Recessed mounting in unventilated or ventilated ceilings. The luminaire must not be covered with insulation. For further details please refer to the assembly instructions. Separate ballast and installation clip for easy and tool-free installation supplied as standard. An assembly plate must be used when mounting on soft tile ceilings.
Connection in separate ballast box. Snap-in terminal block 3x1,5 mm² (x2), through-wiring possible. 5x1,5 mm² (x2) when dimming. Can also be supplied with mains cable and earthed plug or chassis mounted snap-in connector. The luminaire housing and driver are connected via a Quick Connection System.
Luminaire body in black cast aluminium. Visible reflector ring in white PC plastic (RAL 9003).
Metallised PBT in specular or matt aluminium. The reflector has a protective coat of scratch-resistant clear lacquer.
e-Sense Tune – PIR sensor with presence, daylight control. Tunable White and dynamic light. Controlled with Bluetooth unit. RF communications for slaves.
The luminaire is supplied with dust protection over the light opening. Class III applies to the luminaire body only. The supplied driver should be connected to protective earth.
Luminaires with Tunable White (2700-6500 K) are equipped with DALI device Type 8 driver.
For loads in the suspended ceiling system, follow the selected suspended ceiling supplier’s recommendation.
CLO (Constant Light Output) maintains the correct light from the luminaire for the duration of its rated life.
Pleiad G3 is the third generation of Fagerhult's successful downlight range - now equipped with LED. In common with its predecessors, the focus was placed upon perfect light treatment, quick installation and efficiency. In G3...More about the family Pleiad G3
Accessories Notor G2 Ripustettava suora/epäsuora Lamell
|Wieland T-connector||Wieland 5-way T-connector||91026|
|Wieland T-connector||Wieland 3-way T-connector||91025|
|Mounting plate||Mounting plate||41956|
|Retrofit kit||Retrofit kit Ø 165–270 mm||41339|
|Input unit, Tridonic||DALI XC||86132|
|Mounting plate.||Mounting plate HB. Adapted for downlights with recess dimensions Ø 165||41655|
|Mounting plate and support bars||625 mm||41959|
|Mounting plate and support bars||600 mm||41958|
|Control panels, Lunatone||DALI Switch Cross||86354|
|WAGO connection cables, 3-way||Length 3.0 m with female and male connectors, 3x1,5 mm². Halogen free.||91244|
|WAGO connection cables, 5-way||Length 3.0 m with female and male connectors, 5x1,5 mm². Halogen free.||91243|
|Wieland connection cables, 3-way||Length 3.0 m with female and male connectors, 3x1,5 mm². Halogen free.||92793|
|WAGO T-connector||WAGO T-Connector, 3-way, white||91067|
|WAGO T-connector||WAGO T-connector, 5-way, 2 locking levers, blue||88228|
|Wieland connection cables, 5-way||Length 3.0 m with female and male connectors, 5x1,5 mm². Halogen free.||92799|