e-Sense ActiLume

Fagerhult e-Sense ActiLume luminaries are equipped with integrated light control. An attractive, easy installation without the need for add-on or external sensors. e-Sense ActiLume is the quick and easy way to install light control. No connections - no problems.

e-Sense ActiLume in individual offices with personal light

The luminaire has a multisensor which detects movements in the room, measures the incidence of daylight and adjusts the output accordingly. Pre-set lighting scenarios can easily be selected on the sensor unit.

e-Sense ActiLume offers maximum comfort and engery savings up to 60 %, ensuring a quick return on investment. With the system, the user can also adjust the light to the desired level using a momentary switch, pull switch or remote contol. The combination of occupancy detector, light sensor and dimmable ballasts gives a vast range of options.

Advantages

  • Engery-savings
  • Option of creating a personal light level
  • Qucik installation - only mains connection
  • Pre-set lighting scenarios for a customised office
  • All fucntions integrated in the luminaire

Functions

  • Manual control
  • IR-receiver
  • Daylight control
  • Occupancy detector
  • Absence dimming with switch-off

e-Sense ActiLume in open-plan offices

Wit the correct setting on e-Sense ActiLume you get a constant basic light output of 20 % on all luminaires above unoccupied work stations. Luminaries that have been manually switched off will also switch to 20 % output after 15 minutes, producing a good light that saves energy and light sources. This avoids the apperance of dark areas in the office when some of the staff have left for the day. Central swith-off after working hours means that no energy is comsumed in the form of standby power.

Nowdays many work stations are equipped with adjustable desks. This dramatically alters the illuminance on the work surface when the desks are in the rasied position. e-Sense ActiLume automatically regluates the lighting level to match desk position.

Advantages

  • Possibility of individual control and on/off
  • The luminaires swith off automatically afer working hours
  • Controls the lighting levels automatically when height-adjustable desks are used
  • All fucntions integrated in each luminaire
  • Easily programed wia an IR remote

Functions

  • Manual control
  • IR-receiver
  • Daylight control
  • Occupancy detector
  • Absence dimming with switch-off

e-Sense ActiLume in open-plan offices with recessed lighting

Light on accupancy and adapted the the incidental light. Luminaires placed further into the room are controlled with a 30 % offset. Low light level if no occupancy, but not switched off. Effective control for an open-plan office.

Divding the lighting into zones, in relation to the windows, ensures you get the right amount of light when working, as well as a solution in the line with today's approach to energy. With an e-Sense ActiLume master luminaire positioned next to a window, connected luminaires distributed along the window row and other luminaires located more centrally in the room, compensation is made for reduced availability of daylight further inside the room. When the window row is adjusted to 40 % the inner lighting follows with 70 %, i.e. there is a 30 % offset. This gives an adjustable, but even illumination over the entire area. Daylight control becomes more effective and easier to manage if the detected and adjusted areas are not to different in size.

The lighting zones can cover about eight work stations (depending on the furnishing) and contain 10 luminaires. Occupancy detection within the zone can easily be expanded by extra occupancy detectors connected to the same control signal as the luminaires.

Advantages

  • Even light acress the whole room, reglardless of the amout of daylight
  • Automatic on/off via sensors in the luminaires
  • Manual control via momentary swithc if necesary
  • Esay to add extra occupancy detectors in larger office areas
  • Offset function

Functions

  • IR-receiver
  • Daylight control
  • Occupancy detector
  • Channel B 30 % offset