Pleiad Compact G3

Pleiad Compact G3 is the slightly lower version for where ceiling space is limited and is only 100 mm high.

Installation
Recessed mounting in unventilated or ventilated ceilings. Separate ballast and installation clip for easy and tool-free installation supplied as standard. An assembly plate must be used when mounting on soft tile ceilings. The luminaire must not be covered with insulation. For further details please refer to the assembly instructions on our website.

Connection
Connections are made to an independent LED driver. The luminaire is delivered with interconnecting cable.

Design
Luminaire body in black cast aluminium. Visible reflector ring in white PC plastic (RAL 9003).

Reflector
Reflector in either specular or matt anodised aluminium. Specular metallised Advanced Anti-Glare Control ring above the LED module. Mechanical shielding 25°.

LED-information
3000 K/4000 K: Ra (CRI) min. 80, L70 50 000 h, MacAdam 3 SDCM.

Miscellaneous
The luminaire is supplied with dust protection over the light opening. Enclosure class IP 44 under suspended ceilings and IP 20 above suspended ceilings. Class III applies to the luminaire body only. The supplied driver is Class II but should be connected to a  functional Earth.

For loads in the suspended ceiling system, follow the selected suspended ceiling supplier’s recommendation.

Environment images


Детали


Assembly spring clamped in position.

Assembly spring clamped in position.

Выгрузить список продуктов

Документ добавлен

Документы

Reference images


Joy_hero_fagerhult.jpg

Joy

An ultra-efficient LED solution

fagerhult_thales_slide.jpg

Thales

A spacious open-plan work place

Text som beskriver tabellen
W Weight, kg Reflector CCT (K) lm lm/W Useful life Art.No.
LED (system)
10 1,3 Specular 3000 870 88 L90B10 50.000 h 77930
10 1,3 Matt 3000 874 88 L90B10 50.000 h 77931
10 1,3 Specular 4000 874 89 L90B10 50.000 h 77932
10 1,3 Matt 4000 890 91 L90B10 50.000 h 77933
20 1,3 Specular 4000 1652 85 L90B50 50.000 h 77937
20 1,3 Matt 4000 1679 86 L90B50 50.000 h 77938
21 1,3 Specular 3000 1732 82 L90B50 50.000 h 77935
21 1,3 Matt 3000 1757 84 L90B50 50.000 h 77936
Text som beskriver tabellen
W Weight, kg Reflector CCT (K) lm lm/W Useful life Art.No.
LED (system)
10 1,3 Specular 3000 870 88 L90B10 50.000 h 77930-402
10 1,3 Matt 3000 874 88 L90B10 50.000 h 77931-402
10 1,3 Specular 4000 874 89 L90B10 50.000 h 77932-402
10 1,3 Matt 4000 890 91 L90B10 50.000 h 77933-402
20 1,3 Specular 4000 1652 85 L90B50 50.000 h 77937-402
20 1,3 Matt 4000 1679 86 L90B50 50.000 h 77938-402
21 1,3 Specular 3000 1732 82 L90B50 50.000 h 77935-402
21 1,3 Matt 3000 1757 84 L90B50 50.000 h 77936-402
Text som beskriver tabellen
W Weight, kg Reflector CCT (K) lm lm/W Useful life Art.No.
LED (system)
10 1,3 Specular 3000 870 88 L90B10 50.000 h 77930-3
10 1,3 Matt 3000 874 88 L90B10 50.000 h 77931-3
10 1,3 Specular 4000 874 89 L90B10 50.000 h 77932-3
10 1,3 Matt 4000 890 91 L90B10 50.000 h 77933-3
20 1,3 Specular 4000 1652 85 L90B50 50.000 h 77937-3
20 1,3 Matt 4000 1679 86 L90B50 50.000 h 77938-3
21 1,3 Specular 3000 1732 82 L90B50 50.000 h 77935-3
21 1,3 Matt 3000 1757 84 L90B50 50.000 h 77936-3

Assembly plate

For assembly in soft tile ceilings. Stable cardboard. The cardboard has cut-outs to suit all diameters.

Art.No.
Assembly plate 41956

Cilindriq rills

Opal structured shade with grooves in the opening and white Edge ring III.

Art.No.
Ø 165 mm, white (RAL 9016) 41935

Contra

Grey finished cross louvre with intensive coloured centre cone and grey Edge ring III.
Matt reflector recommended.

Art.No.
Ø 165 mm, blue 41880
Ø 165 mm, aqua 41883
Ø 165 mm, green 41886
Ø 165 mm, alu 41889

Cover plate clear IP 64

This accessory consists of Edge ring III and a clear polycarbonate disc.

Art.No.
Ø 165 mm, white (RAL 9016) 41840
Ø 165 mm, grey (RAL 9006) 41844
Ø 165 mm, matt aluminium 41848

Cover plate Delta IP 20

This accessory consists of Edge ring III and a microprism disc in clear acrylic. We recommend Pleiad Soft or Pleiad Evo for best visual expression.

Art.No.
Ø 165 mm, white (RAL 9016) 42031
Ø 165 mm, grey (RAL 9006) 42035
Ø 165 mm, matt aluminium 42039

Cover plate opal IP 54

This accessory consists of Edge ring III and an opal polycarbonate disc.

Art.No.
Ø 165 mm, white (RAL 9016) 41860
Ø 165 mm, grey (RAL 9006) 41864
Ø 165 mm, matt aluminium 41868

Edge ring II

The edge ring hides the lower edge of the reflector and is attached with a bayonet fixing. White or grey plastic or matt brushed aluminium surface.

Art.No.
Ø 165 mm, white (RAL 9016) 41900
Ø 165 mm, grey (RAL 7040) 41904
Ø 165 mm, matt aluminium 41908

Edge ring III

The edge ring hides the lower edge of the reflector and is attached with a bayonet fixing. White or grey plastic or matt brushed aluminium surface.

Art.No.
Ø 165 mm, white (RAL 9016) 41920
Ø 165 mm, grey (RAL 7040) 41924
Ø 165 mm, matt aluminium 41928

Ice

Sandblasted glass ring to be attached to the luminaires edge ring.

Art.No.
Ø 165 41315

Mounting plate.

For installation in soft ceilings for concealed support bar. Requires support rail with a height of 38 mm.

For loads in the suspended ceiling system, follow the selected suspended ceiling supplier’s recommendation.

Art.No.
Mounting plate HB. Adapted for downlights with recess dimensions Ø 165 41655

Opus

Opal structured shade and white Edge ring II. Matt reflector recommended.

Art.No.
Ø 165 mm, white (RAL 9016) 41745

Plain

Blasted glass décor. Suspended on the reflector with the help of three wire clips and white Edge ring III.
Matt reflector recommended.

Art.No.
Ø 165 mm 41698

Retrofit kit

This accessory consists of an Edge ring, white enamelled (RAL 9016) steel sheet disc and a mounting plate (included). The accessory fits Pleiad G2 165, all recessed Pleiad G3 and Pleiad Evo. The Retro-fit kit allows the luminaire to be installed in the existing aperture in the ceiling, Ø 165-255 mm.

Art.No.
Retrofit kit 41339

Ring

Opal or coloured ring and white Edge ring III. Matt reflector recommended.

Art.No.
Ø 165 mm, blue 41970
Ø 165 mm, green 41976
Ø 165 mm, opal 41979

Ringlight

The Ringlight unit is attached to the luminaire's edge ring with a bayonet fixing. Designed without visible screws. Two blasted glass rings with matt brushed aluminium edge ring or white finished sheet steel.
Matt reflector recommended.

Art.No.
Ø 165 mm, white (RAL 9016) 41750
Ø 165 mm, blasted glass 41754

Sloping ceiling cylinder

White enamelled sheet steel. Special brackets are included. Please state required angle. Max sloping ceiling stated below.

Art.No.
Sloping ceiling cylinder 41638

Support

For assembly in soft tile ceilings. Consists of an assembly plate and support bars. The support's profile is adapted for 600 and 625-module.

Art.No.
600 mm 41958
625 mm 41959
Dimensions picture
Light distribution
Matt reflector

Matt reflector

Обратная связь

Обратная связь


Области применения