Pleiad Compact G2 245

Installation
Suitable for recessed mounting in unventilated or ventilated ceilings. Light sources are fitted in the luminaire. Assembly springs for quick assembly without tools are included. An assembly plate should be used when installing in soft tile ceilings. The ballast box can be detached for flexible installation. The luminaire must not be covered with insulation. For further details please refer to the assembly instructions on our website.

Connection
Snap-in terminal block 5x2.5 mm², 3-phase through-wiring possible. Single phase through-wiring is possible on luminaires for emergency lighting. Luminaires for emergency lighting require a separate battery box. The charge indicator is located in the reflector ring.

Design
Luminaire body of black PBT-plastic (RAL 9004) and reflector with reflector ring of white PBT-plastic (RAL 9003).

Reflector
Metallised PBT in specular or matt aluminium. Cut-off angle 20°. The reflector has a protective coat of scratch-resistant clear lacquer.

Emergency lighting
Emergency lighting luminaire must be supplemented with a battery box.

Designed by
Wilma Daemen.

Miscellaneous
Available on special request with mains cable and earthed plug or Wieland snap-in connector. Luminaires supplied with light source fitted.

For loads in the suspended ceiling system, follow the selected suspended ceiling supplier’s recommendation.

Environment images


Детали


The ballast box is detachable to facilitate easy installation.

The ballast box is detachable to facilitate easy installation.

Выгрузить список продуктов

Документ добавлен

Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSQ-E
Delivered with light source 830
2x26 1.0 Specular 77315
2x26 1.0 Matt 77317
Delivered with light source 840
2x26 1.0 Specular 77415
2x26 1.0 Matt 77417
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSQ-E
Delivered with light source 830
2x26 1.0 Specular 77315-436
2x26 1.0 Matt 77317-436
Delivered with light source 840
2x26 1.0 Specular 77415-436
2x26 1.0 Matt 77417-436
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSQ-E
Delivered with light source 830
2x26 1.0 Specular 77315-3
2x26 1.0 Matt 77317-3
Delivered with light source 840
2x26 1.0 Specular 77415-3
2x26 1.0 Matt 77417-3
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSQ-E
Delivered with light source 830
2x26 1.0 Wieland GST18i5 (5-way). Outlet socket Specular 77315-322
2x26 1.0 Wieland GST18i5 (5-way). Outlet socket Matt 77317-322
Delivered with light source 840
2x26 1.0 Wieland GST18i5 (5-way). Outlet socket Specular 77415-322
2x26 1.0 Wieland GST18i5 (5-way). Outlet socket Matt 77417-322
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSQ-E
Delivered with light source 830
2x26 1.0 Specular 77315-111
2x26 1.0 Matt 77317-111
Delivered with light source 840
2x26 1.0 Specular 77415-111
2x26 1.0 Matt 77417-111

Assembly plate

For assembly in soft tile ceilings. Stable cardboard. The cardboard has cut-outs to suit all diameters.

Art.No.
Assembly plate 41956

Cilindriq rills

Opal structured shade with grooves in the opening and white Edge ring III.

Art.No.
Ø 245 mm, white (RAL 9016) 41937

Contra

Grey finished cross louvre with intensive coloured centre cone and grey Edge ring III.
Matt reflector recommended.

Art.No.
Ø 245 mm, blue 41882
Ø 245 mm, aqua 41885
Ø 245 mm, green 41888
Ø 245 mm, alu 41891

Cover plate clear IP 64

This accessory consists of Edge ring III and a clear polycarbonate disc.

Art.No.
Ø 245 mm, white (RAL 9016) 41842
Ø 245 mm, grey (RAL 9006) 41846
Ø 245 mm, matt aluminium 41850

Cover plate Delta IP 20

This accessory consists of Edge ring III and a microprism disc in clear acrylic. We recommend Pleiad Soft or Pleiad Evo for best visual expression.

Art.No.
Ø 245 mm, white (RAL 9016) 42033
Ø 245 mm, grey (RAL 9006) 42037
Ø 245 mm, matt aluminium 42041

Cover plate opal IP 54

This accessory consists of Edge ring III and an opal polycarbonate disc.

Art.No.
Ø 245 mm, white (RAL 9016) 41862
Ø 245 mm, grey (RAL 9006) 41866
Ø 245 mm, matt aluminium 41870

Edge ring II

The edge ring hides the lower edge of the reflector and is attached with a bayonet fixing. White or grey plastic or matt brushed aluminium surface.

Art.No.
Ø 245 mm, white (RAL 9016) 41902
Ø 245 mm, grey (RAL 7040) 41906
Ø 245 mm, matt aluminium 41910

Edge ring III

The edge ring hides the lower edge of the reflector and is attached with a bayonet fixing. White or grey plastic or matt brushed aluminium surface.

Art.No.
Ø 245 mm, white (RAL 9016) 41922
Ø 245 mm, grey (RAL 7040) 41926
Ø 245 mm, matt aluminium 41930

Ice

Sandblasted glass ring to be attached to the luminaires edge ring.

Art.No.
Ø 245 41317

IP 21 cover

Cover of alu-zinc increases the luminaire's enclosure class to IP 21.

Art.No.
Ø 245 mm 41702

Opus

Opal structured shade and white Edge ring II. Matt reflector recommended.

Art.No.
Ø 245 mm, white (RAL 9016) 41747

Plain

Blasted glass décor. Suspended on the reflector with the help of three wire clips and white Edge ring III.
Matt reflector recommended.

Art.No.
Ø 245 mm 41697

Recess panel

Fits panel ceilings 100- and 200-modules. Assembly plates supplied. Manufactured of white finished (RAL 9016) sheet steel.

Art.No.
Ø 245 mm 41777

Ring

Opal or coloured ring and white Edge ring III. Matt reflector recommended.

Art.No.
Ø 245 mm, blue 41972
Ø 245 mm, green 41978
Ø 245 mm, opal 41981

Ringlight

The Ringlight unit is attached to the luminaire's edge ring with a bayonet fixing. Designed without visible screws. Two blasted glass rings with matt brushed aluminium edge ring or white finished sheet steel.
Matt reflector recommended.

Art.No.
Ø 245 mm, white (RAL 9016) 41752
Ø 245 mm, blasted glass 41756

Support

For assembly in soft tile ceilings. Consists of an assembly plate and support bars. The support's profile is adapted for 600 and 625-module.

Art.No.
600 mm 41958
625 mm 41959
Dimensions picture
Specular

Specular

Обратная связь

Обратная связь


Области применения