System.Collections.Generic.List`1[Fagerhult.Models.ViewModels.MediaModel]..AltText

LED Handrail

Installation

Wall or post through separate consoles.

Connection

Each handrail section is supplied with through-wiring 2 x 1.5 mm², designed to be connected to an externally placed LED driver 24 V DC (SELV). Splicing joins for power cables to the handrail are extended inside the handrail.

Design

Body of extruded aluminium, Ø 55 mm. Wall or post bracket and end plate of anodised aluminium. LED mounted in separate extruded aluminium profile incl. lens.

Louvre

Clear disc of extruded PC.

Miscellaneous

Handrail units are delivered ready for continuous installation. Switching or through-wiring to further sections is possible, but limited to a maximum length of 12 m per power point, depending on the choice of driver. For longer systems, power must be supplied to the system from several points. Wall/post mount is prepared for incoming cables. Closing units in the system need to be equipped with end plates (please see accessories). When mounted outdoors, or in damp conditions, the cover strip needs to be placed across the back of the profile and the terminal package used (please see accessories). Voltage drop calculation and cable dimensioning between the driver and handrail must be carried out for longer lengths. The recommended minimum area of cable between the driver and handrail 2 x 1.5 mm² (cable not included). Consideration must be given to the changeability of the ambient temperature and its impact on the overall length. When mounted in environments where the ambient temperature is changeable, systems exceeding a total length of 12 m must be interrupted and supplied with end plates equipped with guide pins (please see accessories). Other lengths are available for the handrail on request. The handrail provides the highest mechanical protection under international classification IK10.

Media

LED Handrail

LED Handrail is a brand new way to integrate light into architecture – in or outdoors. The sleek aluminium handrail creates a cohesive, bright line that enhances the design of the space, whether it is a hall, a courtyard or a...

More about the family LED Handrail

Document

Specification

Filter

Art.no. CCT, K Length, mm
Art.no. CCT, K Length, mm
10030 4200 1023
10031 4200 1431
10032 4200 2861
10033 4200 3882
10034 4200 4290

Filter

Name Description Art.No.
Name Description Art.No.
Connection packageConnection package91085
Cover stripCover strip 1.2 m91087
DriverDriver 10–100 W, non-dimmable 98188
DriverDriver 25 W, non-dimmable 99005
DriverLED driver 180 W/24 V99009
End-capEnd-cap/pair91083
End-cap for longer systems End-cap incl. guide pins91082
SpacersSpacers 1023 mm incl. installation components91086
Wall or post mount Wall/post mounts/pair91084