Quick connection system

Different makes and models of quick connectors can be used to simplify the installation of luminaires. The main benefit of quick connection systems is the reduction in installation times for large or continuous lighting systems.

These systems allow a certain degree of flexibility, as it might be easier to move already-connected products without affecting the fixed installation.

n order to avoid incorrect connection that could, in a worst-case scenario, result in connected products becoming damaged or even dangerous, it is important for the quick connection systems available on the market to be used correctly, i.e. in the manner intended and designed for by the manufacturer. For example, a 5-way connector system intended for 3-phase installation must not be used instead for 1-phase + control cable for dimming. Other connector types must be used for such systems to prevent incorrect connection due to mistakes.

Luminaire equipped with chassis connector and T-connector. Power and connection cables can be fastened after installation using plastic clips. A tool (e.g. screwdriver) is required to loosen the connectors. 
 

Fagerhult offers a range of products with integrated quick connectors. These connectors can either be chassis-mounted or the luminaire can be supplied with the cable and quick connector ready-fitted. All connectors are fitted with locking devices. For products with quick connectors, refer to the relevant product page.

Parts of our range can on request be supplied with Linect connectors. Linect is a new international open standard that with use of interface connectors can be connected to different manufactures of quick connector systems.

Connection cable. 

T-connector. 

Connection cable

T-connector. 

Application area