Vidi 2

Installation
For surface mounting on fixed or suspended ceilings with visible T-bars.

Connection
Cable entry at both ends and double entry in the middle of the luminaire. 5-way snap-in terminal block located in the centre of the luminaire, through-wiring possible.

Design
Louvre frame with sides of extruded aluminium and cast-metal end-caps. Luminaire body of alu-zinc with white finish (RAL 9016).

Louvre
Lined diffuser in PMMA.

Reflector
White enamelled sheet steel.

Dimming
Additional suffix code – 299 DALI contains corridor function.

Environment images


Details


When mounting on visible T-bars, use accessory 91105.

When mounting on visible T-bars, use accessory 91105.

Vidi 2 can be fitted with Fagerhult's lighting control system e-Sense.

Vidi 2 can be fitted with Fagerhult's lighting control system e-Sense.

Marking of product sheet

Document added to your cart

Text som beskriver tabellen
W Weight, kg Kg Art.No.
FDH
1x13/14 2.2 2.2 17340
1x20/24 2.2 2.2 17341
1x25/28 3.7 3.7 17342
1x32/35 4.8 4.8 17343
1x45/49 4.8 4.8 17344
1x50/54 3.7 3.7 17345
Text som beskriver tabellen
W Weight, kg Kg Art.No.
FDH
1x13/14 2.2 2.2 17340-299
1x20/24 2.2 2.2 17341-299
1x25/28 3.7 3.7 17342-299
1x32/35 4.8 4.8 17343-299
1x45/49 4.8 4.8 17344-299
1x50/54 3.7 3.7 17345-299
Text som beskriver tabellen
W Weight, kg Kg Art.No.
FDH
1x13/14 2.2 2.2 17340-436
1x20/24 2.2 2.2 17341-436
1x25/28 3.7 3.7 17342-436
1x32/35 4.8 4.8 17343-436
1x45/49 4.8 4.8 17344-436
1x50/54 3.7 3.7 17345-436
Text som beskriver tabellen
W Weight, kg Kg Art.No.
FDH
1x25/28 3.7 3.7 17342-367
1x32/35 4.8 4.8 17343-367
1x45/49 4.8 4.8 17344-367
1x50/54 3.7 3.7 17345-367

Bracket for mounting on visible T-bars

Vidi 2 has a special bracket so that the luminaire can be mounted easily and quickly on the visible T-bars.

Art.No.
91105

External sensor for e-Sense ActiLume

For presence detection over a larger area, one or more LRM 8118 detectors can be connected to one of the DALI terminals in the luminaire. No programming or commissioning is necessary. LRM 8118 is ideally installed on the ceiling, and has a detection area of approximately 7 x 7 metres. LRM 8118 is only a presence sensor.

Art.No.
External sensor LRM8118 86152

Fluorescent lamp T5, FDH

Art.No.
14, G5, Ra>80, 1200, 96 81347
28, G5, Ra>80, 2600, 104 81349
35, G5, Ra>80, 3300, 104 81350
14, G5, Ra>80, 1200, 96 81351
28, G5, Ra>80, 2600, 104 81355
35, G5, Ra>80, 3300, 104 81357
49, G5, Ra>80, 4300, 99 81359
49, G5, Ra>80, 4300, 99 81362
24, G5, Ra>80, 1750, 89 81372
54, G5, Ra>80, 4450, 93 81374
24, G5, Ra>80, 1750, 89 81376
54, G5, Ra>80, 4450, 93 81378

Remote control for e-Sense ActiLume

To modify function, several modes can be programmed using the remote control. The system is programmed with nine finished modes for schools, corridors, etc.

Art.No.
Remote control 86155

Surface-mounted box for e-Sense ActiLume

Art.No.
Surface mounted box LRM8118 86164

T5 Eco, FDH

Art.No.
13, G5, 1070, 104 81625
13, G5, 1070, 104 81626
20, G5, 1650, 99 81627
20, G5, 1650, 99 81628
25, G5, 2450, 114 81629
25, G5, 2450, 114 81630
32, G5, 3100, 114 81631
32, G5, 3100, 114 81632
45, G5, 4100, 109 81633
45, G5, 4100, 109 81634
50, G5, 4400, 102 81635
50, G5, 4400, 102 81636

Wall panel for e-Sense ActiLume

The unit has only two buttons, one to switch on/increase the light level and one to switch off/reduce the light level.

Art.No.
Wall panel IRT 8050 86151
Dimensions picture
Light distribution
1 x 32/35

1 x 32/35

Application area