Pleiad Square G2 205

Installation
Suitable for recessed mounting in unventilated or ventilated ceilings. Light sources are fitted in the luminaire. Assembly springs for quick, tool-free installation included. An assembly plate should be used when installing in soft tile ceilings. The ballast box can be detached for flexible installation. The luminaire must not be covered with insulation. For further details please refer to the assembly instructions on our website.

Connection
Snap-in terminal block 5x2.5 mm², 3-phase through-wiring possible. The luminaire for emergency lighting has a separate emergency lighting box, which is connected to the luminaire with snap-in connector. All connections are made in the emergency lighting box.

Design
Luminaire body of black PBT plastic and reflector with reflector edge of white PBT plastic (RAL 9010).

Reflector
Metallised PBT in specular or matt aluminium. Cut-off angle 30°. The reflector has a protective coat of scratch-resistant lacquer.

Emergency lighting
Emergency lighting luminaire must be supplemented with an emergency lighting box.

Miscellaneous
Available as standard with mains cable and earthed plug or Wieland snap-in connector. The luminaire is equipped with dust protection in the light opening.

For loads in the suspended ceiling system, follow the selected suspended ceiling supplier’s recommendation.

Environment images


Details


Frame, installed in the ceiling.

Frame, installed in the ceiling.

Ventilation between the reflector and ballast box.

Ventilation between the reflector and ballast box.

Marking of product sheet

Document added to your cart

Text som beskriver tabellen
W Weight, kg Reflector Art.No.
FSM-E
Delivered with light source 830
1x14 1.0 Specular 77720
1x14 1.0 Matt 77721
1x26 1.0 Specular 77722
1x26 1.0 Matt 77723
1x32 1.0 Specular 77724
1x32 1.0 Matt 77725
Delivered with light source 840
1x14 1.0 Specular 77770
1x14 1.0 Matt 77771
1x26 1.0 Specular 77772
1x26 1.0 Matt 77773
1x32 1.0 Specular 77774
1x32 1.0 Matt 77775
Text som beskriver tabellen
W Weight, kg Reflector Art.No.
FSM-E
Delivered with light source 830
1x14 1.0 Specular 77720-368
1x14 1.0 Matt 77721-368
1x26 1.0 Specular 77722-368
1x26 1.0 Matt 77723-368
1x32 1.0 Specular 77724-368
1x32 1.0 Matt 77725-368
Delivered with light source 840
1x14 1.0 Specular 77770-368
1x14 1.0 Matt 77771-368
1x26 1.0 Specular 77772-368
1x26 1.0 Matt 77773-368
1x32 1.0 Specular 77774-368
1x32 1.0 Matt 77775-368
Text som beskriver tabellen
W Weight, kg Reflector Art.No.
FSM-E
Delivered with light source 830
1x26 1.0 Specular 77722-436
1x26 1.0 Matt 77723-436
1x32 1.0 Specular 77724-436
1x32 1.0 Matt 77725-436
Delivered with light source 840
1x26 1.0 Specular 77772-436
1x26 1.0 Matt 77773-436
1x32 1.0 Specular 77774-436
1x32 1.0 Matt 77775-436
Text som beskriver tabellen
W Weight, kg Reflector Art.No.
FSM-E
Delivered with light source 830
1x14 1.0 Specular 77720-3
1x14 1.0 Matt 77721-3
1x26 1.0 Specular 77722-3
1x26 1.0 Matt 77723-3
1x32 1.0 Specular 77724-3
1x32 1.0 Matt 77725-3
Delivered with light source 840
1x14 1.0 Specular 77770-3
1x14 1.0 Matt 77771-3
1x26 1.0 Specular 77772-3
1x26 1.0 Matt 77773-3
1x32 1.0 Specular 77774-3
1x32 1.0 Matt 77775-3
Text som beskriver tabellen
W Weight, kg Reflector Art.No.
FSM-E
Delivered with light source 830 | Emergency light luminaire SwitchDim/DSI
1x26 1.0 Specular 77722-316
1x26 1.0 Matt 77723-316
1x32 1.0 Specular 77724-316
1x32 1.0 Matt 77725-316
Delivered with light source 840 | Emergency light luminaire SwitchDim/DSI
1x26 1.0 Specular 77772-316
1x26 1.0 Matt 77773-316
1x32 1.0 Specular 77774-316
1x32 1.0 Matt 77775-316
Text som beskriver tabellen
W Weight, kg Reflector Art.No.
FSM-E
Delivered with light source 830
1x14 1.0 Specular 77720-319
1x14 1.0 Matt 77721-319
Delivered with light source 830 | Emergency light luminaire HF-std
1x26 1.0 Specular 77722-319
1x26 1.0 Matt 77723-319
1x32 1.0 Specular 77724-319
1x32 1.0 Matt 77725-319
Delivered with light source 840 | Emergency light luminaire HF-std
1x14 1.0 Specular 77770-319
1x14 1.0 Matt 77771-319
1x26 1.0 Specular 77772-319
1x26 1.0 Matt 77773-319
1x32 1.0 Specular 77774-319
1x32 1.0 Matt 77775-319
Text som beskriver tabellen
W Weight, kg Reflector Art.No.
FSM-E
Delivered with light source 830
1x14 1.0 Specular 77720-322
1x14 1.0 Matt 77721-322
1x26 1.0 Specular 77722-322
1x26 1.0 Matt 77723-322
1x32 1.0 Specular 77724-322
1x32 1.0 Matt 77725-322
Delivered with light source 840
1x14 1.0 Specular 77770-322
1x14 1.0 Matt 77771-322
1x26 1.0 Specular 77772-322
1x26 1.0 Matt 77773-322
1x32 1.0 Specular 77774-322
1x32 1.0 Matt 77775-322
Text som beskriver tabellen
W Weight, kg Reflector Art.No.
FSM-E
Delivered with light source 830
1x14 1.0 Specular 77720-111
1x14 1.0 Matt 77721-111
1x26 1.0 Specular 77722-111
1x26 1.0 Matt 77723-111
1x32 1.0 Specular 77724-111
1x32 1.0 Matt 77725-111
Delivered with light source 840
1x14 1.0 Specular 77770-111
1x14 1.0 Matt 77771-111
1x26 1.0 Specular 77772-111
1x26 1.0 Matt 77773-111
1x32 1.0 Specular 77774-111
1x32 1.0 Matt 77775-111

Assembly plate

For assembly in soft tile ceilings. Stable cardboard. The cardboard has cut-outs to suit all dimensions.

Art.No.
Assembly plate 41957

Compact fluorescent lamp FSM-E (CTC-TEL)

Art.No.
14, GR14q1, 1200, 80 81615
14, GR14q1, 1200, 80 81616

Compact fluorescent lamp FSM-E (TS-T/EL)

Amalgam, 6-limb, 4-pin

Art.No.
26, GX24q-3, Ra>80, 1800, 69 81309
32, GX24q-3, Ra>80, 2400, 75 81329
26, GX24q-3, Ra>80, 1800, 69 81476
32, GX24q-3, Ra>80, 2400, 75 81477

Cover plates

This accessory consists of an edge frame and an plastic disc. Supplied with white edge frame.

Art.No.
Clear polycarbonate disc, IP 54, Ø 205 42080
Opal polycarbonate disc, IP 54, Ø 205 42081
Clear microprism disc, IP 20, Ø 205 42082

Edge frame

The edge frame hides the lower edge of the reflector and is assembled using a mounting frame and magnetic catch.

Art.No.
White (RAL 9016), Ø 205 42045

Emergency box

Fagerhult's emergency lighting for Pleiad contains both electronic parts and batteries (NiMH). The batteries have 1 or 3 hours operating time. The box is available in three different styles: A standard version without self-test, a potential free version with self-test and a DALI version with self-test. The self-test is in accordance with EN 62034. The boxes are intended to be recessed in unventilated or ventilated ceilings. The diode that indicates the charge/status is connected to the luminaire. The battery has its own space on the side of the box; protecting all heavy current components against unintentional when changing the batteries. The boxes are designed in class II, IP 20 and are F marked.

Connection
The box is supplied with a 15-way multi connector installed on 0.25 m wiring, for simple connection to the intended luminaire. All external connections are made in a separate space in the emergency box. The boxes are prepared for the connection of control cables that allow for dimming. The terminal block is equipped with integrated fuses for incoming phases (ignition and charging phases). If there is a fault in the emergency lighting luminaire, or faulty work in the installation, the fuses create greater safety. Boxes with self-test are also equipped with separate terminal blocks for connecting DALI or supervision systems based on the use of potential free contacts.

Miscellaneous
The emergency boxes require specially prepared luminaires with HF-standard or HF-dim, which are supplied with diodes for charging/status and equipped with the corresponding multi connector as the box. The box can be combined with luminaires with 13–57 W FSQ-E/ FSM-E light sources. We recommend mercury type light sources, but amalgam light sources may also be used.

Art.No.
0.9, 265x143x42, Standard, 1 h operating time 98014
0.9, 265x143x42, Self-test IV, potential free, 1 h operating time 98015
0.9, 265x143x42, Self-test IV, DALI, 1 h operating time 98016
0.9, 265x143x42, Standard, 3 h operating time 98017

Fitting for metal ceilings

Fittings that are easily secured to the front assembly clip when installing in thin ceilings (metal ceilings). Two fittings required when installing Square.

Art.No.
Fitting for metal ceilings 41983

Support

For assembly in soft tile ceilings. Consists of an assembly plate and support bars. The support's profile is adapted for 600 and 625-module.

Art.No.
600 mm 41953
625 mm 41954
Dimensions picture
Light distribution
1x14 W, specular

1x14 W, specular

1x26 W, specular

1x26 W, specular

1x32 W, specular

1x32 W, specular

Contact us

Contact us


Application area