Pleiad SLD G2 285

Installation
Suitable for recessed mounting in unventilated or ventilated ceilings. Light sources are fitted in the luminaire. Assembly springs for quick, tool-free installation included. An assembly plate should be used when installing in soft tile ceilings. The ballast box can be detached for flexible installation.
The luminaire must not be covered with insulation. For further details please refer to the assembly instructions on our website.

Connection
Snap-in terminal block 5x2.5 mm², 3-phase through-wiring possible. The luminaire for emergency lighting has a separate emergency lighting box, which is connected to the luminaire with snap-in connector. All connections are made in the emergency lighting box.

Design
Luminaire body of black PBT plastic (RAL 9004) and reflector with reflector ring of white PBT plastic (RAL 9003).

Reflector
Rotational symmetric reflector in metallised PBT in specular or matt aluminium. Cut-off angle 30°. The reflector has a protective coat of scratch-resistant lacquer.

Emergency lighting
Emergency lighting luminaire must be supplemented with an emergency lighting box.

Miscellaneous
Available as standard with mains cable and earthed plug or Wieland snap-in connector. The luminaire is equipped with dust protection in the light opening.

For loads in the suspended ceiling system, follow the selected suspended ceiling supplier’s recommendation.

Environment images


Details


Quick connection terminal with T-splitter for looping in.

Quick connection terminal with T-splitter for looping in.

Luminaire with IP 21 accessory.

Luminaire with IP 21 accessory.

Marking of product sheet

Document added to your cart

Reference images


fagerhult_helsinki_concert_centre.jpg

Helsinki Music Centre

A symphony of light

fagerhult_parish_of_oulu_hero.jpg

Parish union of Oulu

Circles of light

Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSM-E
Delivered with light source 830
1x57 1.7 Specular 77390
1x57 1.7 Matt 77392
Delivered with light source 840
1x57 1.7 Specular 77490
1x57 1.7 Matt 77492
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSM-E
Delivered with light source 830
1x57 1.7 Specular 77390-368
1x57 1.7 Matt 77392-368
Delivered with light source 840
1x57 1.7 Specular 77490-368
1x57 1.7 Matt 77492-368
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSM-E
Delivered with light source 830
1x57 1.7 Specular 77390-3
1x57 1.7 Matt 77392-3
Delivered with light source 840
1x57 1.7 Specular 77490-3
1x57 1.7 Matt 77492-3
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSM-E
Delivered with light source 830
1x57 1.7 Wieland GST18i5 (5-way). Outlet socket Specular 77390-322
1x57 1.7 Wieland GST18i5 (5-way). Outlet socket Matt 77392-322
Delivered with light source 840
1x57 1.7 Wieland GST18i5 (5-way). Outlet socket Specular 77490-322
1x57 1.7 Wieland GST18i5 (5-way). Outlet socket Matt 77492-322
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSM-E
Delivered with light source 830
1x57 1.7 Specular 77390-111
1x57 1.7 Matt 77392-111
Delivered with light source 840
1x57 1.7 Specular 77490-111
1x57 1.7 Matt 77492-111
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSM-E
1x57 1.7 Specular 77590-205
1x57 1.7 Matt 77592-205
Delivered with light source 830
1x57 1.7 Specular 77390-205
1x57 1.7 Matt 77392-205
Delivered with light source 840
1x57 1.7 Specular 77490-205
1x57 1.7 Matt 77492-205

Assembly plate

For assembly in soft tile ceilings. Stable cardboard. The cardboard has cut-outs to suit all diameters.

Art.No.
Assembly plate 41956

Cilindriq rills

Opal structured shade with grooves in the opening and white Edge ring III.

Art.No.
Ø 285 mm, white (RAL 9016) 41938

Compact fluorescent lamp FSM-E (TS-T/EL)

Amalgam, 6-limb, 4-pin

Art.No.
57, GX24q-5, Ra>80, 4300, 75 81334
57, GX24q-5, Ra>80, 4300, 75 81336

Cover plate clear IP 64

This accessory consists of Edge ring III and a clear polycarbonate disc.

Art.No.
Ø 285 mm, white (RAL 9016) 41843
Ø 285 mm, grey (RAL 9006) 41847
Ø 285 mm, matt aluminium 41851

Cover plate Delta IP 20

This accessory consists of Edge ring III and a microprism disc in clear acrylic. We recommend Pleiad Soft or Pleiad Evo for best visual expression.

Art.No.
Ø 285 mm, white (RAL 9016) 42034
Ø 285 mm, grey (RAL 9006) 42038
Ø 285 mm, matt aluminium 42042

Cover plate opal IP 54

This accessory consists of Edge ring III and an opal polycarbonate disc.

Art.No.
Ø 285 mm, white (RAL 9016) 41863
Ø 285 mm, grey (RAL 9006) 41867
Ø 285 mm, matt aluminium 41871

Edge ring II

The edge ring hides the lower edge of the reflector and is attached with a bayonet fixing. White or grey plastic or matt brushed aluminium surface.

Art.No.
Ø 285 mm, white (RAL 9016) 41903
Ø 285 mm, grey (RAL 7040) 41907
Ø 285 mm, matt aluminium 41911

Edge ring III

The edge ring hides the lower edge of the reflector and is attached with a bayonet fixing. White or grey plastic or matt brushed aluminium surface.

Art.No.
Ø 285 mm, white (RAL 9016) 41923
Ø 285 mm, grey (RAL 7040) 41927
Ø 285 mm, matt aluminium 41931

Emergency box

Fagerhult's emergency lighting for Pleiad contains both electronic parts and batteries (NiMH). The batteries have 1 or 3 hours operating time. The box is available in three different styles: A standard version without self-test, a potential free version with self-test and a DALI version with self-test. The self-test is in accordance with EN 62034. The boxes are intended to be recessed in unventilated or ventilated ceilings. The diode that indicates the charge/status is connected to the luminaire. The battery has its own space on the side of the box; protecting all heavy current components against unintentional when changing the batteries. The boxes are designed in class II, IP 20 and are F marked.

Connection
The box is supplied with a 15-way multi connector installed on 0.25 m wiring, for simple connection to the intended luminaire. All external connections are made in a separate space in the emergency box. The boxes are prepared for the connection of control cables that allow for dimming. The terminal block is equipped with integrated fuses for incoming phases (ignition and charging phases). If there is a fault in the emergency lighting luminaire, or faulty work in the installation, the fuses create greater safety. Boxes with self-test are also equipped with separate terminal blocks for connecting DALI or supervision systems based on the use of potential free contacts.

Miscellaneous
The emergency boxes require specially prepared luminaires with HF-standard or HF-dim, which are supplied with diodes for charging/status and equipped with the corresponding multi connector as the box. The box can be combined with luminaires with 13–57 W FSQ-E/ FSM-E light sources. We recommend mercury type light sources, but amalgam light sources may also be used.

Art.No.
0.9, 265x143x42, Standard, 1 h operating time 98014
0.9, 265x143x42, Self-test IV, potential free, 1 h operating time 98015
0.9, 265x143x42, Self-test IV, DALI, 1 h operating time 98016
0.9, 265x143x42, Standard, 3 h operating time 98017

Fitting for metal ceilings

Fittings that are easily secured to the front assembly clip when installing in thin ceilings (metal ceilings). Two fittings required when installing Square.

Art.No.
Fitting for metal ceilings 41983

IP 21 cover

Cover of alu-zinc increases the luminaire's enclosure class to IP 21.

Art.No.
Ø 285 mm 41706

Opus

Opal structured shade and white Edge ring II. Matt reflector recommended.

Art.No.
Ø 285 mm, white (RAL 9016) 41748

Recess panel

Fits panel ceilings 100- and 200-modules. Assembly plates supplied. Manufactured of white finished (RAL 9016) sheet steel.

Art.No.
Ø 285 mm 41778

Ringlight

The Ringlight unit is attached to the luminaire's edge ring with a bayonet fixing. Designed without visible screws. Two blasted glass rings with matt brushed aluminium edge ring or white finished sheet steel.
Matt reflector recommended.

Art.No.
Ø 285 mm, blasted glass 41757

Support

For assembly in soft tile ceilings. Consists of an assembly plate and support bars. The support's profile is adapted for 600 and 625-module.

Art.No.
600 mm 41958
625 mm 41959
Dimensions picture
1x57 W, specular

1x57 W, specular

1x57 W, matt

1x57 W, matt

Contact us

Contact us


Application area