Pleiad SLD G2 245

Installation
Suitable for recessed mounting in unventilated or ventilated ceilings. Light sources are fitted in the luminaire. Assembly springs for quick, tool-free installation included. An assembly plate should be used when installing in soft tile ceilings. The ballast box can be detached for flexible installation.
The luminaire must not be covered with insulation. For further details please refer to the assembly instructions on our website.

Connection
Snap-in terminal block 5x2.5 mm², 3-phase through-wiring possible. The luminaire for emergency lighting has a separate emergency lighting box, which is connected to the luminaire with snap-in connector. All connections are made in the emergency lighting box.

Design
Luminaire body of black PBT plastic (RAL 9004) and reflector with reflector ring of white PBT plastic (RAL 9003).

Reflector
Rotational symmetric reflector in metallised PBT in specular or matt aluminium. Cut-off angle 30°. The reflector has a protective coat of scratch-resistant lacquer.

Emergency lighting
Emergency lighting luminaire must be supplemented with an emergency lighting box.

Miscellaneous
Available as standard with mains cable and earthed plug or Wieland snap-in connector. The luminaire is equipped with dust protection in the light opening.

For loads in the suspended ceiling system, follow the selected suspended ceiling supplier’s recommendation.

Environment images


Details


Front assembly spring.

Front assembly spring.

Ventilation duct for the light source.

Ventilation duct for the light source.

Marking of product sheet

Document added to your cart

Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSM-E
1x42 1.3 Matt 77582
2x32 1.3 Specular 77575
Delivered with light source 830
1x17 1.3 Specular 77373
1x17 1.3 Matt 77374
1x42 1.3 Specular 77380
1x42 1.3 Matt 77382
2x17 1.3 Specular 77378
2x17 1.3 Matt 77379
2x32 1.3 Specular 77375
2x32 1.3 Matt 77377
Delivered with light source 840
1x17 1.3 Specular 77473
1x17 1.3 Matt 77474
1x42 1.3 Specular 77480
1x42 1.3 Matt 77482
2x17 1.3 Specular 77478
2x17 1.3 Matt 77479
2x32 1.3 Specular 77475
2x32 1.3 Matt 77477
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSM-E
Delivered with light source 830
1x17 1.3 Specular 77373-368
1x17 1.3 Matt 77374-368
1x42 1.3 Specular 77380-368
1x42 1.3 Matt 77382-368
2x17 1.3 Specular 77378-368
2x17 1.3 Matt 77379-368
2x32 1.3 Specular 77375-368
2x32 1.3 Matt 77377-368
Delivered with light source 840
1x17 1.3 Specular 77473-368
1x17 1.3 Matt 77474-368
1x42 1.3 Specular 77480-368
1x42 1.3 Matt 77482-368
2x17 1.3 Specular 77478-368
2x17 1.3 Matt 77479-368
2x32 1.3 Specular 77475-368
2x32 1.3 Matt 77477-368
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSM-E
Delivered with light source 830
1x42 1.3 Specular 77380-436
1x42 1.3 Matt 77382-436
2x32 1.3 Specular 77375-436
2x32 1.3 Matt 77377-436
Delivered with light source 840
1x42 1.3 Specular 77480-436
1x42 1.3 Matt 77482-436
2x32 1.3 Specular 77475-436
2x32 1.3 Matt 77477-436
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSM-E
Delivered with light source 830
1x17 1.3 Specular 77373-3
1x17 1.3 Matt 77374-3
1x42 1.3 Specular 77380-3
1x42 1.3 Matt 77382-3
2x17 1.3 Specular 77378-3
2x17 1.3 Matt 77379-3
2x32 1.3 Specular 77375-3
2x32 1.3 Matt 77377-3
Delivered with light source 840
1x17 1.3 Specular 77473-3
1x17 1.3 Matt 77474-3
1x42 1.3 Specular 77480-3
1x42 1.3 Matt 77482-3
2x17 1.3 Specular 77478-3
2x17 1.3 Matt 77479-3
2x32 1.3 Specular 77475-3
2x32 1.3 Matt 77477-3
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSM-E
Delivered with light source 830
1x42 1.3 Specular 77380-316
1x42 1.3 Matt 77382-316
2x32 1.3 Specular 77375-316
2x32 1.3 Matt 77377-316
Delivered with light source 840
1x42 1.3 Specular 77480-316
1x42 1.3 Matt 77482-316
2x32 1.3 Specular 77475-316
2x32 1.3 Matt 77477-316
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSM-E
Delivered with light source 830
1x17 1.3 Specular 77373-319
1x17 1.3 Matt 77374-319
1x42 1.3 Specular 77380-319
1x42 1.3 Matt 77382-319
2x17 1.3 Specular 77378-319
2x17 1.3 Matt 77379-319
2x32 1.3 Specular 77375-319
2x32 1.3 Matt 77377-319
Delivered with light source 840
1x17 1.3 Specular 77473-319
1x17 1.3 Matt 77474-319
1x42 1.3 Specular 77480-319
1x42 1.3 Matt 77482-319
2x17 1.3 Specular 77478-319
2x17 1.3 Matt 77479-319
2x32 1.3 Specular 77475-319
2x32 1.3 Matt 77477-319
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSM-E
Delivered with light source 830
1x17 1.3 Wieland GST18i5 (5-way). Outlet socket Specular 77373-322
1x17 1.3 Wieland GST18i5 (5-way). Outlet socket Matt 77374-322
1x42 1.3 Wieland GST18i5 (5-way). Outlet socket Specular 77380-322
1x42 1.3 Wieland GST18i5 (5-way). Outlet socket Matt 77382-322
2x17 1.3 Wieland GST18i5 (5-way). Outlet socket Specular 77378-322
2x17 1.3 Wieland GST18i5 (5-way). Outlet socket Matt 77379-322
2x32 1.3 Wieland GST18i5 (5-way). Outlet socket Specular 77375-322
2x32 1.3 Wieland GST18i5 (5-way). Outlet socket Matt 77377-322
Delivered with light source 840
1x17 1.3 Wieland GST18i5 (5-way). Outlet socket Specular 77473-322
1x17 1.3 Wieland GST18i5 (5-way). Outlet socket Matt 77474-322
1x42 1.3 Wieland GST18i5 (5-way). Outlet socket Specular 77480-322
1x42 1.3 Wieland GST18i5 (5-way). Outlet socket Matt 77482-322
2x17 1.3 Wieland GST18i5 (5-way). Outlet socket Specular 77478-322
2x17 1.3 Wieland GST18i5 (5-way). Outlet socket Matt 77479-322
2x32 1.3 Wieland GST18i5 (5-way). Outlet socket Specular 77475-322
2x32 1.3 Wieland GST18i5 (5-way). Outlet socket Matt 77477-322
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSM-E
Delivered with light source 830
1x17 1.3 Specular 77373-303
1x17 1.3 Matt 77374-303
1x42 1.3 Specular 77380-303
1x42 1.3 Matt 77382-303
2x17 1.3 Specular 77378-303
2x17 1.3 Matt 77379-303
2x32 1.3 Specular 77375-303
2x32 1.3 Matt 77377-303
Delivered with light source 840
1x17 1.3 Specular 77473-303
1x17 1.3 Matt 77474-303
1x42 1.3 Specular 77480-303
1x42 1.3 Matt 77482-303
2x17 1.3 Specular 77478-303
2x17 1.3 Matt 77479-303
2x32 1.3 Specular 77475-303
2x32 1.3 Matt 77477-303
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSM-E
Delivered with light source 830
1x17 1.3 Specular 77373-111
1x17 1.3 Matt 77374-111
1x42 1.3 Specular 77380-111
1x42 1.3 Matt 77382-111
2x17 1.3 Specular 77378-111
2x17 1.3 Matt 77379-111
2x32 1.3 Specular 77375-111
2x32 1.3 Matt 77377-111
Delivered with light source 840
1x17 1.3 Specular 77473-111
1x17 1.3 Matt 77474-111
1x42 1.3 Specular 77480-111
1x42 1.3 Matt 77482-111
2x17 1.3 Specular 77478-111
2x17 1.3 Matt 77479-111
2x32 1.3 Specular 77475-111
2x32 1.3 Matt 77477-111
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSM-E
1x42 1.3 Specular 77580-205
1x42 1.3 Matt 77582-205
2x32 1.3 Specular 77575-205
2x32 1.3 Matt 77577-205
Delivered with light source 830
1x42 1.3 Specular 77380-205
1x42 1.3 Matt 77382-205
2x32 1.3 Specular 77375-205
2x32 1.3 Matt 77377-205
Delivered with light source 840
1x42 1.3 Specular 77480-205
1x42 1.3 Matt 77482-205
2x32 1.3 Specular 77475-205
2x32 1.3 Matt 77477-205

Assembly plate

For assembly in soft tile ceilings. Stable cardboard. The cardboard has cut-outs to suit all diameters.

Art.No.
Assembly plate 41956

Cilindriq rills

Opal structured shade with grooves in the opening and white Edge ring III.

Art.No.
Ø 245 mm, white (RAL 9016) 41937

Compact fluorescent lamp FSM-E (CTC-TEL)

Art.No.
17, GR14q1, 1450, 81 81617
17, GR14q1, 1450, 81 81618

Compact fluorescent lamp FSM-E (TS-T/EL)

Amalgam, 6-limb, 4-pin

Art.No.
32, GX24q-3, Ra>80, 2400, 75 81329
42, GX24q-4, Ra>80, 3200, 76 81331
32, GX24q-3, Ra>80, 2400, 75 81477
42, GX24q-4, Ra>80, 3200, 76 81478

Contra

Grey finished cross louvre with intensive coloured centre cone and grey Edge ring III.
Matt reflector recommended.

Art.No.
Ø 245 mm, blue 41882
Ø 245 mm, aqua 41885
Ø 245 mm, green 41888
Ø 245 mm, alu 41891

Cover plate clear IP 64

This accessory consists of Edge ring III and a clear polycarbonate disc.

Art.No.
Ø 245 mm, white (RAL 9016) 41842
Ø 245 mm, grey (RAL 9006) 41846
Ø 245 mm, matt aluminium 41850

Cover plate Delta IP 20

This accessory consists of Edge ring III and a microprism disc in clear acrylic. We recommend Pleiad Soft or Pleiad Evo for best visual expression.

Art.No.
Ø 245 mm, white (RAL 9016) 42033
Ø 245 mm, grey (RAL 9006) 42037
Ø 245 mm, matt aluminium 42041

Cover plate opal IP 54

This accessory consists of Edge ring III and an opal polycarbonate disc.

Art.No.
Ø 245 mm, white (RAL 9016) 41862
Ø 245 mm, grey (RAL 9006) 41866
Ø 245 mm, matt aluminium 41870

Edge ring II

The edge ring hides the lower edge of the reflector and is attached with a bayonet fixing. White or grey plastic or matt brushed aluminium surface.

Art.No.
Ø 245 mm, white (RAL 9016) 41902
Ø 245 mm, grey (RAL 7040) 41906
Ø 245 mm, matt aluminium 41910

Edge ring III

The edge ring hides the lower edge of the reflector and is attached with a bayonet fixing. White or grey plastic or matt brushed aluminium surface.

Art.No.
Ø 245 mm, white (RAL 9016) 41922
Ø 245 mm, grey (RAL 7040) 41926
Ø 245 mm, matt aluminium 41930

Emergency box

Fagerhult's emergency lighting for Pleiad contains both electronic parts and batteries (NiMH). The batteries have 1 or 3 hours operating time. The box is available in three different styles: A standard version without self-test, a potential free version with self-test and a DALI version with self-test. The self-test is in accordance with EN 62034. The boxes are intended to be recessed in unventilated or ventilated ceilings. The diode that indicates the charge/status is connected to the luminaire. The battery has its own space on the side of the box; protecting all heavy current components against unintentional when changing the batteries. The boxes are designed in class II, IP 20 and are F marked.

Connection
The box is supplied with a 15-way multi connector installed on 0.25 m wiring, for simple connection to the intended luminaire. All external connections are made in a separate space in the emergency box. The boxes are prepared for the connection of control cables that allow for dimming. The terminal block is equipped with integrated fuses for incoming phases (ignition and charging phases). If there is a fault in the emergency lighting luminaire, or faulty work in the installation, the fuses create greater safety. Boxes with self-test are also equipped with separate terminal blocks for connecting DALI or supervision systems based on the use of potential free contacts.

Miscellaneous
The emergency boxes require specially prepared luminaires with HF-standard or HF-dim, which are supplied with diodes for charging/status and equipped with the corresponding multi connector as the box. The box can be combined with luminaires with 13–57 W FSQ-E/ FSM-E light sources. We recommend mercury type light sources, but amalgam light sources may also be used.

Art.No.
0.9, 265x143x42, Standard, 1 h operating time 98014
0.9, 265x143x42, Self-test IV, potential free, 1 h operating time 98015
0.9, 265x143x42, Self-test IV, DALI, 1 h operating time 98016
0.9, 265x143x42, Standard, 3 h operating time 98017

Fitting for metal ceilings

Fittings that are easily secured to the front assembly clip when installing in thin ceilings (metal ceilings). Two fittings required when installing Square.

Art.No.
Fitting for metal ceilings 41983

IP 21 cover

Cover of alu-zinc increases the luminaire's enclosure class to IP 21.

Art.No.
Ø 245 mm 41705

Opus

Opal structured shade and white Edge ring II. Matt reflector recommended.

Art.No.
Ø 245 mm, white (RAL 9016) 41747

Plain

Blasted glass décor. Suspended on the reflector with the help of three wire clips and white Edge ring III.
Matt reflector recommended.

Art.No.
Ø 245 mm 41697

Recess panel

Fits panel ceilings 100- and 200-modules. Assembly plates supplied. Manufactured of white finished (RAL 9016) sheet steel.

Art.No.
Ø 245 mm 41777

Ring

Opal or coloured ring and white Edge ring III. Matt reflector recommended.

Art.No.
Ø 245 mm, blue 41972
Ø 245 mm, green 41978
Ø 245 mm, opal 41981

Ringlight

The Ringlight unit is attached to the luminaire's edge ring with a bayonet fixing. Designed without visible screws. Two blasted glass rings with matt brushed aluminium edge ring or white finished sheet steel.
Matt reflector recommended.

Art.No.
Ø 245 mm, white (RAL 9016) 41752
Ø 245 mm, blasted glass 41756

Support

For assembly in soft tile ceilings. Consists of an assembly plate and support bars. The support's profile is adapted for 600 and 625-module.

Art.No.
600 mm 41958
625 mm 41959
Dimensions picture
1x42 W, matt

1x42 W, matt

1x42 W, specular

1x42 W, specular

1x17 W, matt

1x17 W, matt

1x17 W, specular

1x17 W, specular

Contact us

Contact us


Application area