Pleiad Compact G2 165

Installation
Suitable for recessed mounting in unventilated or ventilated ceilings. Light sources are fitted in the luminaire. Assembly springs for quick assembly without tools are included. An assembly plate should be used when installing in soft tile ceilings. The ballast box can be detached for flexible installation. The luminaire must not be covered with insulation. For further details please refer to the assembly instructions on our website.

Connection
Snap-in terminal block 5x2.5 mm², 3-phase through-wiring possible. Single phase through-wiring is possible on luminaires for HF-dim and emergency lighting. Luminaires for emergency lighting feature a separate battery box. The charge indicator is located in the reflector ring.

Design
Luminaire body of black PBT-plastic (RAL 9004) and reflector with white reflector ring of white PBT-plastic (RAL 9003).

Reflector
Metallised PBT in specular or matt aluminium. Cut-off angle 20°. The reflector has a protective coat of scratch-resistant clear lacquer.

Emergency lighting
Emergency lighting luminaire must be supplemented with a battery box.

Designed by
Wilma Daemen.

Miscellaneous
Available on special request with mains cable and earthed plug or Wieland snap-in connector. Luminaires supplied with light source fitted.

For loads in the suspended ceiling system, follow the selected suspended ceiling supplier’s recommendation.

Environment images


Details


Blue Wieland connector for dimming.

Blue Wieland connector for dimming.

Marking of product sheet

Document added to your cart

Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSQ-E
Delivered with light source 830.
1x18 0.7 Specular 77300
1x18 0.7 Matt 77302
Delivered with light source 840.
1x18 0.7 Specular 77400
1x18 0.7 Matt 77402
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSQ-E
Delivered with light source 830.
1x18 0.7 Specular 77300-436
1x18 0.7 Matt 77302-436
Delivered with light source 840.
1x18 0.7 Specular 77400-436
1x18 0.7 Matt 77402-436
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSQ-E
Delivered with light source 830.
1x18 0.7 Specular 77300-3
1x18 0.7 Matt 77302-3
Delivered with light source 840.
1x18 0.7 Specular 77400-3
1x18 0.7 Matt 77402-3
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSQ-E
Delivered with light source 830
1x18 0.7 Wieland GST18i5 (5-way). Outlet socket Specular 77300-322
1x18 0.7 Wieland GST18i5 (5-way). Outlet socket Matt 77302-322
Delivered with light source 840
1x18 0.7 Wieland GST18i5 (5-way). Outlet socket Specular 77400-322
1x18 0.7 Wieland GST18i5 (5-way). Outlet socket Matt 77402-322
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSQ-E
Delivered with light source 830
1x18 0.7 Specular 77300-111
1x18 0.7 Matt 77302-111
Delivered with light source 840
1x18 0.7 Specular 77400-111
1x18 0.7 Matt 77402-111

Assembly plate

For assembly in soft tile ceilings. Stable cardboard. The cardboard has cut-outs to suit all diameters.

Art.No.
Assembly plate 41956

Cilindriq rills

Opal structured shade with grooves in the opening and white Edge ring III.

Art.No.
Ø 165 mm, white (RAL 9016) 41935

Compact fluorescent lamp FSQ-E

4-limb, 4-pin, short

Art.No.
18, G24q-2, Ra>80, 1200, 66 81222

Compact fluorescent lamp FSQ-E

4-limb, 4-pin, short

Art.No.
18, G24q-2, Ra>80, 1200, 66 81435

Compact Fluorscent Lamp FSQ-I

Art.No.
18, G24d-2, Ra>80, 1200, 66 81256

Contra

Grey finished cross louvre with intensive coloured centre cone and grey Edge ring III.
Matt reflector recommended.

Art.No.
Ø 165 mm, blue 41880
Ø 165 mm, aqua 41883
Ø 165 mm, green 41886
Ø 165 mm, alu 41889

Cover plate clear IP 64

This accessory consists of Edge ring III and a clear polycarbonate disc.

Art.No.
Ø 165 mm, white (RAL 9016) 41840
Ø 165 mm, grey (RAL 9006) 41844
Ø 165 mm, matt aluminium 41848

Cover plate Delta IP 20

This accessory consists of Edge ring III and a microprism disc in clear acrylic. We recommend Pleiad Soft or Pleiad Evo for best visual expression.

Art.No.
Ø 165 mm, white (RAL 9016) 42031
Ø 165 mm, grey (RAL 9006) 42035
Ø 165 mm, matt aluminium 42039

Cover plate opal IP 54

This accessory consists of Edge ring III and an opal polycarbonate disc.

Art.No.
Ø 165 mm, white (RAL 9016) 41860
Ø 165 mm, grey (RAL 9006) 41864
Ø 165 mm, matt aluminium 41868

Edge ring II

The edge ring hides the lower edge of the reflector and is attached with a bayonet fixing. White or grey plastic or matt brushed aluminium surface.

Art.No.
Ø 165 mm, white (RAL 9016) 41900
Ø 165 mm, grey (RAL 7040) 41904
Ø 165 mm, matt aluminium 41908

Edge ring III

The edge ring hides the lower edge of the reflector and is attached with a bayonet fixing. White or grey plastic or matt brushed aluminium surface.

Art.No.
Ø 165 mm, white (RAL 9016) 41920
Ø 165 mm, grey (RAL 7040) 41924
Ø 165 mm, matt aluminium 41928

Ice

Sandblasted glass ring to be attached to the luminaires edge ring.

Art.No.
Ø 165 41315

IP 21 cover

Cover of alu-zinc increases the luminaire's enclosure class to IP 21.

Art.No.
Ø 165 mm 41700

Mounting plate.

For installation in soft ceilings for concealed support bar. Requires support rail with a height of 38 mm.

For loads in the suspended ceiling system, follow the selected suspended ceiling supplier’s recommendation.

Art.No.
Mounting plate HB. Adapted for downlights with recess dimensions Ø 165 41655

Opus

Opal structured shade and white Edge ring II. Matt reflector recommended.

Art.No.
Ø 165 mm, white (RAL 9016) 41745

Plain

Blasted glass décor. Suspended on the reflector with the help of three wire clips and white Edge ring III.
Matt reflector recommended.

Art.No.
Ø 165 mm 41698

Recess panel

Fits panel ceilings 100- and 200-modules. Assembly plates supplied. Manufactured of white finished (RAL 9016) sheet steel.

Art.No.
Ø 165 mm 41775

Retrofit kit

This accessory consists of an Edge ring, white enamelled (RAL 9016) steel sheet disc and a mounting plate (included). The accessory fits Pleiad G2 165, all recessed Pleiad G3 and Pleiad Evo. The Retro-fit kit allows the luminaire to be installed in the existing aperture in the ceiling, Ø 165-255 mm.

Art.No.
Retrofit kit 41339

Ring

Opal or coloured ring and white Edge ring III. Matt reflector recommended.

Art.No.
Ø 165 mm, blue 41970
Ø 165 mm, green 41976
Ø 165 mm, opal 41979

Ringlight

The Ringlight unit is attached to the luminaire's edge ring with a bayonet fixing. Designed without visible screws. Two blasted glass rings with matt brushed aluminium edge ring or white finished sheet steel.
Matt reflector recommended.

Art.No.
Ø 165 mm, white (RAL 9016) 41750
Ø 165 mm, blasted glass 41754

Support

For assembly in soft tile ceilings. Consists of an assembly plate and support bars. The support's profile is adapted for 600 and 625-module.

Art.No.
600 mm 41958
625 mm 41959
Dimensions picture
1x18 W, specular

1x18 W, specular

1x18 W, matt

1x18 W, matt

Contact us

Contact us


Application area