Itza Delta

Installation
Wire suspended via friction locks secured to the luminaire. Wire suspension ordered separately, see wire suspension.

Connection
Single – Connections are made at the end of the luminaire and are concealed by the end-cap. 5-way snap-in terminal block at one end. Continuous installation – 5-way snap-in terminal block at each end and through-wiring cable 3⊗1.5 mm² as standard. With dimming, 5-way snap-in terminal block, 1-phase through-wiring possible.

Design
Luminaire body of sheet steel, white (RAL 9016) or alu-grey (RAL 9006) finish, end-caps in polycarbonate. Other colours on request. The top is covered by an active film which generates a broad light pattern and which works as a dust cover. When continuous installation is required the luminaire is supplemented with continuous couplers and end-caps, see the accessory page.

Louvre
Delta – microprism louvre in acrylic (PMMA.

Reflector
The louvre act as a reflector.

LED-information
3000 K/4000 K: Ra (CRI) min. 80, MacAdam 3 SDCM.
2700–6500 K: Ra (CRI) min. 80, MacAdam 3 SDCM.
Driver life-time: up to 100.000 h/10 % (max failure).

Miscellaneous

Luminaires with Tunable White (2700-6500 K) are equipped with DALI device Type 8 driver and are listed as 4000 K in the table – the range is shown in the brackets.

Environment images


Details


The end-caps can be supplied in different colours on request.

The end-caps can be supplied in different colours on request.

Itza is suitable for continuous installation.

Itza is suitable for continuous installation.

Marking of product sheet

Document added to your cart

Text som beskriver tabellen
W SDCM Colour CCT (K) CRI lm lm/W Useful life Art.No.
LED (system)
Continuous
45 3 White 3000 ≥ 80 5400 120 L90B50 65.000 h 16643
45 3 Grey 3000 ≥ 80 5400 120 L90B50 65.000 h 16647
45 3 White 4000 ≥ 80 5400 120 L90B50 65.000 h 16653
45 3 Grey 4000 ≥ 80 5400 120 L90B50 65.000 h 16657
Single
45 3 White 3000 ≥ 80 5662 126 L90B50 65.000 h 16641
45 3 Grey 3000 ≥ 80 5662 126 L90B50 65.000 h 16645
45 3 White 4000 ≥ 80 5662 126 L90B50 65.000 h 16651
45 3 Grey 4000 ≥ 80 5662 126 L90B50 65.000 h 16655
Text som beskriver tabellen
W SDCM Colour CCT (K) CRI lm lm/W Useful life Art.No.
LED (system)
Continuous
45 3 White 3000 ≥ 80 5400 120 L90B50 65.000 h 16643-402
45 3 Grey 3000 ≥ 80 5400 120 L90B50 65.000 h 16647-402
45 3 White 4000 ≥ 80 5400 120 L90B50 65.000 h 16653-402
45 3 Grey 4000 ≥ 80 5400 120 L90B50 65.000 h 16657-402
Single
45 3 White 3000 ≥ 80 5662 126 L90B50 65.000 h 16641-402
45 3 Grey 3000 ≥ 80 5662 126 L90B50 65.000 h 16645-402
45 3 White 4000 ≥ 80 5662 126 L90B50 65.000 h 16651-402
45 3 Grey 4000 ≥ 80 5662 126 L90B50 65.000 h 16655-402
Text som beskriver tabellen
W SDCM Colour CCT (K) CRI lm lm/W Useful life Art.No.
LED (Tunable White). Luminaire is listed in 4000 K, range in brackets.
Single
51 3 White 4000 (2700–6500) ≥ 80 5209 (4579-5430) 106 (97-110) L90B50 65.000 h 16672
51 3 Grey 4000 (2700–6500) ≥ 80 5209 (4579-5430) 106 (97-110) L90B50 65.000 h 16673
Text som beskriver tabellen
W SDCM Colour CCT (K) CRI lm lm/W Useful life Art.No.
LED (system)
Continuous
45 3 White 3000 ≥ 80 5400 120 L90B50 65.000 h 16643-497
45 3 Grey 3000 ≥ 80 5400 120 L90B50 65.000 h 16647-497
45 3 White 4000 ≥ 80 5400 120 L90B50 65.000 h 16653-497
45 3 Grey 4000 ≥ 80 5400 120 L90B50 65.000 h 16657-497
Text som beskriver tabellen
W SDCM Colour CCT (K) CRI lm lm/W Useful life Art.No.
LED (system)
Single
45 3 White 3000 ≥ 80 5662 126 L90B50 65.000 h 16641-448
45 3 Grey 3000 ≥ 80 5662 126 L90B50 65.000 h 16645-448
45 3 White 4000 ≥ 80 5662 126 L90B50 65.000 h 16651-448
45 3 Grey 4000 ≥ 80 5662 126 L90B50 65.000 h 16655-448
Text som beskriver tabellen
W SDCM Colour CCT (K) CRI lm lm/W Useful life Art.No.
LED (Tunable White). Luminaire is listed in 4000 K, range in brackets.
Single
51 3 White 2700–6500 ≥ 80 4550 89 L90B50 65.000 h 16672-477
51 3 Grey 2700–6500 ≥ 80 4550 89 L90B50 65.000 h 16673-477
Text som beskriver tabellen
W SDCM Colour CCT (K) CRI lm lm/W Useful life Art.No.
LED (Tunable White). Luminaire is listed in 4000 K, range in brackets.
Single
51 3 White 2700–6500 ≥ 80 4550 89 L90B50 65.000 h 16672-478
51 3 Grey 2700–6500 ≥ 80 4550 89 L90B50 65.000 h 16673-478
Text som beskriver tabellen
W SDCM Colour CCT (K) CRI lm lm/W Useful life Art.No.
LED (system)
Single
45 3 White 3000 ≥ 80 5662 126 L90B50 65.000 h 16641-449
45 3 Grey 3000 ≥ 80 5662 126 L90B50 65.000 h 16645-449
45 3 White 4000 ≥ 80 5662 126 L90B50 65.000 h 16651-449
45 3 Grey 4000 ≥ 80 5662 126 L90B50 65.000 h 16655-449

Connection cable for controller for e-Sense Connect

Art.No.
Connection cable between control unit and controller to e-Sense Connect 86303

Continuous coupler

Continuous lighting installation is supplemented with end-plates and wire suspension.

Art.No.
Continuous coupler including 2 friction locks, white/each 94777
Continuous coupler including 2 friction locks, grey/each 94778

Controller for e-Sense Connect

Central to the system is a controller which is the link between the luminaires and the control functions. The controller transmits over the 2.4 GHz frequency band. The RF units in the luminaire work with a technology called CRMX, which stands for cognitive radio multiplexer, and means in practical terms that communications are always optimally secured with guaranteed access.

Art.No.
Control unit to e-Sense Connect 86300

End-cap for continuous lighting installation

Art.No.
End-cap, white/pair 94770
End-cap, grey/pair 94771
End-cap, white/pair for sensor 94772
End-cap, grey/pair for sensor 94773

External sensor for e-Sense ActiLume

For presence detection over a larger area, one or more LRM 8118 detectors can be connected to one of the DALI terminals in the luminaire. No programming or commissioning is necessary. LRM 8118 is ideally installed on the ceiling, and has a detection area of approximately 7 x 7 metres. LRM 8118 is only a presence sensor.

Art.No.
External sensor LRM8118 86152

Remote control for e-Sense ActiLume

To modify function, several modes can be programmed using the remote control. The system is programmed with nine finished modes for schools, corridors, etc.

Art.No.
Remote control 86155

Remote control for e-Sense Connect

The remote control is used as a temporary tool for grouping the system. A few basic functions can create a very energy-efficient solution with a high degree of lighting comfort for the user. The remote control uses RF rather than IR signals, which means that it only needs to be directed towards the luminaires at the first grouping.

Art.No.
Remote control (for grouping) to e-Sense Connect 86301

Surface-mounted box for e-Sense ActiLume

Art.No.
Surface mounted box LRM8118 86164

Wall panel for e-Sense ActiLume

The unit has only two buttons, one to switch on/increase the light level and one to switch off/reduce the light level.

Art.No.
Wall panel IRT 8050 86151
Dimensions picture
Light distribution
Delta

Delta

Designer


Itza Delta is designed by Designit

Application area