Recessed in unventilated ceilings. Installation springs for quick assembly are included. A mounting plate or support should be used when mounting in soft tile ceiling, see Accessories. The luminaire must not be covered with insulation. For further details please refer to the assembly instructions on our website.
Connection with cable and class II plug. Snap-in.
Luminaire body of cast aluminium. Assembly arms of spring steel. The luminaire is available in white (RAL 9016) structured or alu-grey (RAL 9006) structured and three designs; fixed, swivelled 355°and tiltable 30°or 90°.
Light distribution is dependent on the chosen light source. Halogen light source HRGI is available in several distribution angles.
Black baffle to increase the mechanical cut-off angle.
A separate 12 V transformer is required. The transformers for Easy have a two-way snap-in connection between luminaire and transformer. Transformers are delivered with cable and class II plug for mains connection. Information about transformers, see Transformers.
Marking of product sheet
|Assembly plate for soft tile ceiling, Ø 110||41964|
|Assembly plate for soft tile ceiling, Ø 75, Ø 95, Ø 107||41982|
|Connection cable, Ensto female, free cable tails, 1 m||96857|
|Connection cable, Ensto female, free cable tails, 2 m||96858|
|35, GU 5,3, 10||81440|
|35, GU 5,3, 24/25||81441|
|35, GU 5,3, 38||81442|
|50, GU 5,3, 10||81445|
|50, GU 5,3, 24/25||81446|
|50, GU 5,3, 38||81447|
|50, GU 5,3, 60||81448|
|70 VA, cable 1x1.0 m||99070|
|105 VA, cable 2x1.0 m||99071|
|105 VA, cable 3x1.0 m||99072|
|105 VA, cable 2x2.0 m||99074|
|105 VA, cable 3x2.0 m||99075|
|150 VA, cable 2x1.0 m||99077|
|150 VA, cable 3x1.0 m||99078|
|150 VA, cable 4x1.0 m||99079|
|150 VA, cable 3x2.0 m||99080|
|150 VA, cable 4x2.0 m||99081|
Light distribution Easy