Optional, either surface or recess mounted in ventilated and unventilated areas. c/c between securing holes is optional 38, 55, 60, 67 and 78 mm. When recessed the product supports a ceiling thickness of between 5 and 25 mm.

Phase, neutral conductors and possibly a protective earth. The detachable lower section housing the electronics and battery is connected where applicable to the terminal block in the luminaire body with a “plug-in” connection. Through-wiring of 2.5 mm cable possible (all positions). Cable entries fitted with blanking grommets on the top. Strain relief for movable cables with recess mounting supplied. Also prepared for a surface mounted mains cable. The luminaire is not intended for continual operation.

Degree of protection IP 40 (with permanent installation), protection class II. Plastic parts of PC/ABS plastic. Recess mounting clips of stainless steel.

emLED-sc is vibration resistant. The product conforms to the requirements set out in IEC 60068-2-6 test FC and IEC 60068-2- 64 test FV.

Environment images

Marking of product sheet

Document added to your cart

Text som beskriver tabellen
W Weight, kg Comment Miscellaneous Art.No.
emLED-sc for central supply
1x 0.2 For central supply via e.g. an inverter or another type of uninterrupted power supply (UPS). Is not intended for continual operation. 198-264V/50-60Hz alt. 154-276 DC 98155

Assembly plate

Assembly plate for soft tile ceiling, Ø 75, Ø 95, Ø 107 41982
Dimensions picture