Pleiad SLD G2 165

Installation
Suitable for recessed mounting in unventilated or ventilated ceilings. Light sources are fitted in the luminaire. Assembly springs for quick, tool-free installation included. An assembly plate should be used when installing in soft tile ceilings. The ballast box can be detached for flexible installation.
The luminaire must not be covered with insulation. For further details please refer to the assembly instructions on our website.

Connection
Snap-in terminal block 5x2.5 mm², 3-phase through-wiring possible. The luminaire for emergency lighting has a separate emergency lighting box, which is connected to the luminaire with snap-in connector. All connections are made in the emergency lighting box.

Design
Luminaire body of black PBT plastic (RAL 9004) and reflector with reflector ring of white PBT plastic (RAL 9003).

Reflector
Rotational symmetric reflector in metallised PBT in specular or matt aluminium. Cut-off angle 30°. The reflector has a protective coat of scratch-resistant lacquer.

Emergency lighting
Emergency lighting luminaire must be supplemented with an emergency lighting box.

Miscellaneous
Available as standard with mains cable and earthed plug or Wieland snap-in connector. The luminaire is equipped with dust protection in the light opening.

For loads in the suspended ceiling system, follow the selected suspended ceiling supplier’s recommendation.

Environment images


Details


Front ventilation opening.

Front ventilation opening.

Luminaire with connected emergency lighting box.

Luminaire with connected emergency lighting box.

Marking of product sheet

Document added to your cart

References


fagerhult_parish_of_oulu_hero.jpg

Parish union of Oulu

Circles of light

Text som beskriver tabellen
W Weight, kg Reflector Art.No.
FSM-E
Delivered with light source 830
1x18 0.9 Specular 77350
1x18 0.9 Matt 77352
Delivered with light source 840
1x18 0.9 Specular 77450
1x18 0.9 Matt 77452
Text som beskriver tabellen
W Weight, kg Reflector Art.No.
FSM-E
Delivered with light source 830
1x18 0.9 Specular 77350-368
1x18 0.9 Matt 77352-368
Delivered with light source 840
1x18 0.9 Specular 77450-368
1x18 0.9 Matt 77452-368
Text som beskriver tabellen
W Weight, kg Reflector Art.No.
FSM-E
Delivered with light source 830
1x18 0.9 Specular 77350-436
1x18 0.9 Matt 77352-436
Delivered with light source 840
1x18 0.9 Specular 77450-436
1x18 0.9 Matt 77452-436
Text som beskriver tabellen
W Weight, kg Reflector Art.No.
FSM-E
Delivered with light source 830
1x18 0.9 Specular 77350-3
1x18 0.9 Matt 77352-3
Delivered with light source 840. Connection cable with plug, L=2.5 m.
1x18 0.9 Specular 77450-3
1x18 0.9 Matt 77452-3
Text som beskriver tabellen
W Weight, kg Reflector Art.No.
FSM-E
Delivered with light source 830
1x18 0.9 Specular 77350-316
1x18 0.9 Matt 77352-316
Delivered with light source 840
1x18 0.9 Specular 77450-316
1x18 0.9 Matt 77452-316
Text som beskriver tabellen
W Weight, kg Reflector Art.No.
FSM-E
Delivered with light source 830
1x18 0.9 Specular 77350-319
1x18 0.9 Matt 77352-319
Delivered with light source 840
1x18 0.9 Specular 77450-319
1x18 0.9 Matt 77452-319
Text som beskriver tabellen
W Weight, kg Reflector Art.No.
FSM-E
Delivered with light source 830
1x18 0.9 Matt 77352-322
1x18 0.9 Specular 77350-322
Delivered with light source 840
1x18 0.9 Matt 77452-322
1x18 0.9 Specular 77450-322
Text som beskriver tabellen
W Weight, kg Reflector Art.No.
FSM-E
Delivered with light source 830
1x18 0.9 Specular 77350-111
1x18 0.9 Matt 77352-111
Delivered with light source 840
1x18 0.9 Specular 77450-111
1x18 0.9 Matt 77452-111
Text som beskriver tabellen
W Weight, kg Reflector Art.No.
FSM-E
1x18 0.9 Specular 77550-205
1x18 0.9 Matt 77552-205
Delivered with light source 830
1x18 0.9 Specular 77350-205
1x18 0.9 Matt 77352-205
Delivered with light source 840
1x18 0.9 Specular 77450-205
1x18 0.9 Matt 77452-205

Assembly plate

For assembly in soft tile ceilings. Stable cardboard. The cardboard has cut-outs to suit all diameters.

Art.No.
Assembly plate 41956

Cilindriq rills

Opal structured shade with grooves in the opening and white Edge ring III.

Art.No.
Ø 165 mm, white (RAL 9016) 41935

Compact fluorescent lamp FSM-E (TS-T/EL)

Amalgam, 6-limb, 4-pin

Art.No.
18, 3000, GX24q-2, Ra>80, 1200, 66 81327
18, 4000, GX24q-2, Ra>80, 1200, 66 81475

Contra

Grey finished cross louvre with intensive coloured centre cone and grey Edge ring III.
Matt reflector recommended.

Art.No.
Ø 165 mm, blue 41880
Ø 165 mm, aqua 41883
Ø 165 mm, green 41886
Ø 165 mm, alu 41889

Cover plate clear IP 64

This accessory consists of Edge ring III and a clear polycarbonate disc.

Art.No.
Ø 165 mm, white (RAL 9016) 41840
Ø 165 mm, grey (RAL 9006) 41844
Ø 165 mm, matt aluminium 41848

Cover plate Delta IP 20

This accessory consists of Edge ring III and a microprism disc in clear acrylic. We recommend Pleiad Soft or Pleiad Evo for best visual expression.

Art.No.
Ø 165 mm, white (RAL 9016) 42031
Ø 165 mm, grey (RAL 9006) 42035
Ø 165 mm, matt aluminium 42039

Cover plate opal IP 54

This accessory consists of Edge ring III and an opal polycarbonate disc.

Art.No.
Ø 165 mm, white (RAL 9016) 41860
Ø 165 mm, grey (RAL 9006) 41864
Ø 165 mm, matt aluminium 41868

Edge ring II

The edge ring hides the lower edge of the reflector and is attached with a bayonet fixing. White or grey plastic or matt brushed aluminium surface.

Art.No.
Ø 165 mm, white (RAL 9016) 41900
Ø 165 mm, grey (RAL 7040) 41904
Ø 165 mm, matt aluminium 41908

Edge ring III

The edge ring hides the lower edge of the reflector and is attached with a bayonet fixing. White or grey plastic or matt brushed aluminium surface.

Art.No.
Ø 165 mm, white (RAL 9016) 41920
Ø 165 mm, grey (RAL 7040) 41924
Ø 165 mm, matt aluminium 41928

Emergency box

Fagerhult's emergency lighting for Pleiad contains both electronic parts and batteries (NiMH). The batteries have 1 or 3 hours operating time. The box is available in three different styles: A standard version without self-test, a potential free version with self-test and a DALI version with self-test. The self-test is in accordance with EN 62034. The boxes are intended to be recessed in unventilated or ventilated ceilings. The diode that indicates the charge/status is connected to the luminaire. The battery has its own space on the side of the box; protecting all heavy current components against unintentional when changing the batteries. The boxes are designed in class II, IP 20 and are F marked.

Connection
The box is supplied with a 15-way multi connector installed on 0.25 m wiring, for simple connection to the intended luminaire. All external connections are made in a separate space in the emergency box. The boxes are prepared for the connection of control cables that allow for dimming. The terminal block is equipped with integrated fuses for incoming phases (ignition and charging phases). If there is a fault in the emergency lighting luminaire, or faulty work in the installation, the fuses create greater safety. Boxes with self-test are also equipped with separate terminal blocks for connecting DALI or supervision systems based on the use of potential free contacts.

Miscellaneous
The emergency boxes require specially prepared luminaires with HF-standard or HF-dim, which are supplied with diodes for charging/status and equipped with the corresponding multi connector as the box. The box can be combined with luminaires with 13–57 W FSQ-E/ FSM-E light sources. We recommend mercury type light sources, but amalgam light sources may also be used.

Art.No.
0.9, 265x143x42, Standard, 1 h operating time 98014
0.9, 265x143x42, Self-test IV, potential free, 1 h operating time 98015
0.9, 265x143x42, Self-test IV, DALI, 1 h operating time 98016
0.9, 265x143x42, Standard, 3 h operating time 98017

Fitting for metal ceilings

Fittings that are easily secured to the front assembly clip when installing in thin ceilings (metal ceilings). Two fittings required when installing Square.

Art.No.
Fitting for metal ceilings 41983

Ice

Sandblasted glass ring to be attached to the luminaires edge ring.

Art.No.
Ø 165 41315

IP 21 cover

Cover of alu-zinc increases the luminaire's enclosure class to IP 21.

Art.No.
Ø 165 mm 41703

Mounting plate.

For installation in soft ceilings for concealed support bar. Requires support rail with a height of 38 mm.

For loads in the suspended ceiling system, follow the selected suspended ceiling supplier’s recommendation.

Art.No.
Mounting plate HB. Adapted for downlights with recess dimensions Ø 165 41655

Opus

Opal structured shade and white Edge ring II. Matt reflector recommended.

Art.No.
Ø 165 mm, white (RAL 9016) 41745

Plain

Blasted glass décor. Suspended on the reflector with the help of three wire clips and white Edge ring III.
Matt reflector recommended.

Art.No.
Ø 165 mm 41698

Recess panel

Fits panel ceilings 100- and 200-modules. Assembly plates supplied. Manufactured of white finished (RAL 9016) sheet steel.

Art.No.
Ø 165 mm 41775

Retrofit kit

This accessory consists of an Edge ring, white enamelled (RAL 9016) steel sheet disc and a mounting plate (included). The accessory fits Pleiad G2 165, all recessed Pleiad G3 and Pleiad Evo. The Retro-fit kit allows the luminaire to be installed in the existing aperture in the ceiling, Ø 165-255 mm.

Art.No.
Retrofit kit 41339

Ring

Opal or coloured ring and white Edge ring III. Matt reflector recommended.

Art.No.
Ø 165 mm, blue 41970
Ø 165 mm, green 41976
Ø 165 mm, opal 41979

Ringlight

The Ringlight unit is attached to the luminaire's edge ring with a bayonet fixing. Designed without visible screws. Two blasted glass rings with matt brushed aluminium edge ring or white finished sheet steel.
Matt reflector recommended.

Art.No.
Ø 165 mm, white (RAL 9016) 41750
Ø 165 mm, blasted glass 41754

Support

For assembly in soft tile ceilings. Consists of an assembly plate and support bars. The support's profile is adapted for 600 and 625-module.

Art.No.
600 mm 41958
625 mm 41959
Dimensions picture
1x18 W, matt

1x18 W, matt

1x18 W, specular

1x18 W, specular

Contact us

Contact us