About DTI type 3 Beta
Wire suspension via friction locks on the luminaire. Wire suspension ordered separately, see accessories.
The luminaire is equipped with a 2.4 m mains cable 3x1.0 mm² and an earthed plug. Luminaire with the additional suffix -436 and -368 are supplied with a 2.4 m main cable 5x0.75 mm² excl. plug.
Body of enamelled sheet steel with white (RAL 9016) finish. End-caps of polypropylene plastic. Transparent acrylic diffuser on the top side.
Beta – double parabolic reflector louvre with satin matt metallised aluminium side and cross-blades with excellent reflection characteristics (> 92 %), integrated into a single unit. Re-lamping is performed from the top, without removing the louvre. Earthed.
Separate reflectors for indirect and direct light distribution. Reflector material of metallised aluminium with satin matt surface.
Some models are available with emLED, emergency lighting unit, which is positioned at the short end of the luminaire. Read more about emLED in Emergency Lighting.
Most models can also be equipped with other ballasts for dimming.
Installation accessories, see accessories.
Downloads DTI type 3 Beta
Marking of product sheet
Functions DTI type 3 Beta
Accessories DTI type 3 Beta
For presence detection over a larger area, one or more LRM 8118 detectors can be connected to one of the DALI terminals in the luminaire. No programming or commissioning is necessary. LRM 8118 is ideally installed on the ceiling, and has a detection area of approximately 7 x 7 metres. LRM 8118 is only a presence sensor.
|External sensor LRM8118||86152|
|28, 4000, G5, Ra>80, 2600, 104||81349|
|35, 4000, G5, Ra>80, 3300, 104||81350|
|28, 3000, G5, Ra>80, 2600, 104||81355|
|35, 3000, G5, Ra>80, 3300, 104||81357|
|49, 3000, G5, Ra>80, 4300, 99||81359|
|49, 4000, G5, Ra>80, 4300, 99||81362|
To modify function, several modes can be programmed using the remote control. The system is programmed with nine finished modes for schools, corridors, etc.
For installation in suspended ceilings with modular measurement 600 mm and visible T-bars with width 25 mm or 15 mm. The rail is mounted directly against the suspended ceiling. Made of white enamelled plate. The luminaire is suspended from clips that run on the support rail. Delivered incl. clips and bracket. Length: 600 mm, t-bars: 25/15, max load: 75N
|L=600 mm, T-bars: 25/15, max load: 75 N/pair||90017|
|Surface mounted box LRM8118||86164|
|25, 3000, G5, 2450, 114||81629|
|25, 4000, G5, 2450, 114||81630|
|32, 3000, G5, 3100, 114||81631|
|32, 4000, G5, 3100, 114||81632|
|45, 3000, G5, 4100, 109||81633|
|45, 4000, G5, 4100, 109||81634|
The unit has only two buttons, one to switch on/increase the light level and one to switch off/reduce the light level.
|Wall panel IRT 8050||86151|
Wire suspension sets (single wire) for singly installed luminaires. Not including the mains cable (included with luminaire). L=1.5 m.
|Small ceiling cup, white/pair||94414|
|Small ceiling cup for T-bars 25 mm, white/pair||94415|
Light distribution DTI type 3 Beta
3x32/35 W, Beta