Presence detection switches lights on and off automatically. Adjustable time between detection and switching off.
Lighting output is adapted to the amount of incident daylight.
Manual control via pull cord dimmer switch in the luminaire or non-locking switch on the wall.
Existing installations do not need to be changed when new lighting is added.
Settings can be configured using remote control (accessory)
How e-Sense Connect works
e-Sense Connect is wireless, and all luminaires – both with and without sensors – are fitted with an RF device for communication with the control unit. Because everything is integrated in the luminaires, no external sensors for presence and daylight control are required. The luminaires are connected to mains voltage and therefore require neither control cables nor adjustments to the building structure.
The luminaires are grouped into different groups, and the groupings determine how the luminaires react. Groupings are set by remote control.
Each row of luminaires should have one luminaire with a sensor. The sensors in each row communicate with the control unit, which determines the lighting requirement for each row.
- Control unit
- Control unit (rotary potentiometer and non-locking push button)
- Remote control for grouping