Pleiad Square G2 245

Installation
Suitable for recessed mounting in unventilated or ventilated ceilings. Light sources are fitted in the luminaire. Assembly springs for quick, tool-free installation included. An assembly plate should be used when installing in soft tile ceilings. The ballast box can be detached for flexible installation. The luminaire must not be covered with insulation. For further details please refer to the assembly instructions on our website.

Connection
Snap-in terminal block 5x2.5 mm², 3-phase through-wiring possible. The luminaire for emergency lighting has a separate emergency lighting box, which is connected to the luminaire with snap-in connector. All connections are made in the emergency lighting box.

Design
Luminaire body of black PBT plastic and reflector with reflector edge of white PBT plastic (RAL 9010).

Reflector
Metallised PBT in specular or matt aluminium. Cut-off angle 30°. The reflector has a protective coat of scratch-resistant lacquer.

Emergency lighting
Emergency lighting luminaire must be supplemented with an emergency lighting box.

Miscellaneous
Available as standard with mains cable and earthed plug or Wieland snap-in connector. The luminaire is equipped with dust protection in the light opening.

For loads in the suspended ceiling system, follow the selected suspended ceiling supplier’s recommendation.

Environment images


Details


Specular reflector.

Specular reflector.

Assembly springs used to install Pleiad Square.

Assembly springs used to install Pleiad Square.

Marking of product sheet

Document added to your cart

Text som beskriver tabellen
W Weight, kg Reflector Art.No.
FSM-E
Delivered with light source 830
1x17 1.0 Specular 77726
1x17 1.0 Matt 77727
1x42 1.0 Specular 77728
1x42 1.0 Matt 77729
Delivered with light source 840
1x17 1.0 Specular 77776
1x17 1.0 Matt 77777
1x42 1.0 Specular 77778
1x42 1.0 Matt 77779
Text som beskriver tabellen
W Weight, kg Reflector Art.No.
FSM-E
Delivered with light source 830
1x17 1.0 Specular 77726-368
1x17 1.0 Matt 77727-368
1x42 1.0 Specular 77728-368
1x42 1.0 Matt 77729-368
Delivered with light source 840
1x17 1.0 Specular 77776-368
1x17 1.0 Matt 77777-368
1x42 1.0 Specular 77778-368
1x42 1.0 Matt 77779-368
Text som beskriver tabellen
W Weight, kg Reflector Art.No.
FSM-E
Delivered with light source 830
1x42 1.0 Specular 77728-436
1x42 1.0 Matt 77729-436
Delivered with light source 840
1x42 1.0 Specular 77778-436
1x42 1.0 Matt 77779-436
Text som beskriver tabellen
W Weight, kg Reflector Art.No.
FSM-E
Delivered with light source 830
1x17 1.0 Specular 77726-3
1x17 1.0 Matt 77727-3
1x42 1.0 Specular 77728-3
1x42 1.0 Matt 77729-3
Delivered with light source 840
1x17 1.0 Specular 77776-3
1x17 1.0 Matt 77777-3
1x42 1.0 Specular 77778-3
1x42 1.0 Matt 77779-3
Text som beskriver tabellen
W Weight, kg Reflector Art.No.
FSM-E
Delivered with light source 830 | Emergency light luminaire SwitchDim/DSI
1x42 1.0 Specular 77728-316
1x42 1.0 Matt 77729-316
Delivered with light source 840 | Emergency light luminaire SwitchDim/DSI
1x42 1.0 Specular 77778-316
1x42 1.0 Matt 77779-316
Text som beskriver tabellen
W Weight, kg Reflector Art.No.
FSM-E
Delivered with light source 830 | Emergency light luminaire HF-std
1x17 1.0 Specular 77726-319
1x17 1.0 Matt 77727-319
1x42 1.0 Specular 77728-319
1x42 1.0 Matt 77729-319
Delivered with light source 840 | Emergency light luminaire HF-std
1x17 1.0 Specular 77776-319
1x17 1.0 Matt 77777-319
1x42 1.0 Specular 77778-319
1x42 1.0 Matt 77779-319
Text som beskriver tabellen
W Weight, kg Reflector Art.No.
FSM-E
Delivered with light source 830
1x17 1.0 Specular 77726-322
1x17 1.0 Matt 77727-322
1x42 1.0 Specular 77728-322
1x42 1.0 Matt 77729-322
Delivered with light source 840
1x17 1.0 Specular 77776-322
1x17 1.0 Matt 77777-322
1x42 1.0 Specular 77778-322
1x42 1.0 Matt 77779-322
Text som beskriver tabellen
W Weight, kg Reflector Art.No.
FSM-E
Delivered with light source 830
1x17 1.0 Specular 77726-111
1x17 1.0 Matt 77727-111
1x42 1.0 Specular 77728-111
1x42 1.0 Matt 77729-111
Delivered with light source 840
1x17 1.0 Specular 77776-111
1x17 1.0 Matt 77777-111
1x42 1.0 Specular 77778-111
1x42 1.0 Matt 77779-111

Assembly plate

For assembly in soft tile ceilings. Stable cardboard. The cardboard has cut-outs to suit all dimensions.

Art.No.
Assembly plate 41957

Compact fluorescent lamp FSM-E (CTC-TEL)

Art.No.
17, 3000, GR14q1, 1450, 81 81617
17, 4000, GR14q1, 1450, 81 81618

Compact fluorescent lamp FSM-E (TS-T/EL)

Amalgam, 6-limb, 4-pin

Art.No.
42, 3000, GX24q-4, Ra>80, 3200, 76 81331
42, 4000, GX24q-4, Ra>80, 3200, 76 81478

Cover plates

This accessory consists of an edge frame and an plastic disc. Supplied with white edge frame.

Art.No.
Clear polycarbonate disc, IP 54, Ø 245 42083
Opal polycarbonate disc, IP 54, Ø 245 42084
Clear microprism disc, IP 20, Ø 245 42085

Edge frame

The edge frame hides the lower edge of the reflector and is assembled using a mounting frame and magnetic catch.

Art.No.
White (RAL 9016), Ø 245 42046

Emergency box

Fagerhult's emergency lighting for Pleiad contains both electronic parts and batteries (NiMH). The batteries have 1 or 3 hours operating time. The box is available in three different styles: A standard version without self-test, a potential free version with self-test and a DALI version with self-test. The self-test is in accordance with EN 62034. The boxes are intended to be recessed in unventilated or ventilated ceilings. The diode that indicates the charge/status is connected to the luminaire. The battery has its own space on the side of the box; protecting all heavy current components against unintentional when changing the batteries. The boxes are designed in class II, IP 20 and are F marked.

Connection
The box is supplied with a 15-way multi connector installed on 0.25 m wiring, for simple connection to the intended luminaire. All external connections are made in a separate space in the emergency box. The boxes are prepared for the connection of control cables that allow for dimming. The terminal block is equipped with integrated fuses for incoming phases (ignition and charging phases). If there is a fault in the emergency lighting luminaire, or faulty work in the installation, the fuses create greater safety. Boxes with self-test are also equipped with separate terminal blocks for connecting DALI or supervision systems based on the use of potential free contacts.

Miscellaneous
The emergency boxes require specially prepared luminaires with HF-standard or HF-dim, which are supplied with diodes for charging/status and equipped with the corresponding multi connector as the box. The box can be combined with luminaires with 13–57 W FSQ-E/ FSM-E light sources. We recommend mercury type light sources, but amalgam light sources may also be used.

Art.No.
0.9, 265x143x42, Standard, 1 h operating time 98014
0.9, 265x143x42, Self-test IV, potential free, 1 h operating time 98015
0.9, 265x143x42, Self-test IV, DALI, 1 h operating time 98016
0.9, 265x143x42, Standard, 3 h operating time 98017

Fitting for metal ceilings

Fittings that are easily secured to the front assembly clip when installing in thin ceilings (metal ceilings). Two fittings required when installing Square.

Art.No.
Fitting for metal ceilings 41983

Support

For assembly in soft tile ceilings. Consists of an assembly plate and support bars. The support's profile is adapted for 600 and 625-module.

Art.No.
600 mm 41953
625 mm 41954
Dimensions picture
Light distribution
1x42 W, specular

1x42 W, specular

1x17 W, specular

1x17 W, specular

Contact us

Contact us