Pleiad Compact G2 205

Installation
Suitable for recessed mounting in unventilated or ventilated ceilings. Light sources are fitted in the luminaire. Assembly springs for quick assembly without tools are included. An assembly plate should be used when installing in soft tile ceilings. The ballast box can be detached for flexible installation. The luminaire must not be covered with insulation. For further details please refer to the assembly instructions on our website.

Connection
Snap-in terminal block 5x2.5mm², 3-phase through-wiring possible. Single phase through-wiring is possible on luminaires for emergency lighting. Luminaires for emergency lighting feature a separate battery box. The charge indicator is located in the reflector ring.

Design
Luminaire body of black PBT-plastic (RAL 9004) and reflector with white reflector ring of white PBT-plastic (RAL 9003).

Reflector
Metallised PBT in specular or matt aluminium. Cut-off angle 20°. The reflector has a protective coat of scratch-resistant clear lacquer.

Emergency lighting
Emergency lighting luminaire must be supplemented with a battery box.

Designed by
Wilma Daemen.

Miscellaneous
Available on special request with mains cable and earthed plug or Wieland snap-in connector. Luminaires supplied with light source fitted.

For loads in the suspended ceiling system, follow the selected suspended ceiling supplier’s recommendation.

Environment images


Details


The ballast box is easily detached when there are obstacles in the recessed area.

The ballast box is easily detached when there are obstacles in the recessed area.

The ballast box is easily detached when there is a low installation height.

The ballast box is easily detached when there is a low installation height.

Marking of product sheet

Document added to your cart

References


fagerhult_parish_of_oulu_hero.jpg

Parish union of Oulu

Circles of light

Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSQ-E
Delivered with light source 830
1x26 0.9 Specular 77310
1x26 0.9 Matt 77312
2x18 0.9 Specular 77305
2x18 0.9 Matt 77307
Delivered with light source 840
1x26 0.9 Specular 77410
1x26 0.9 Matt 77412
2x18 0.9 Specular 77405
2x18 0.9 Matt 77407
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSQ-E
Delivered with light source 830
1x26 0.9 Specular 77310-436
1x26 0.9 Matt 77312-436
2x18 0.9 Specular 77305-436
2x18 0.9 Matt 77307-436
Delivered with light source 840
1x26 0.9 Specular 77410-436
1x26 0.9 Matt 77412-436
2x18 0.9 Specular 77405-436
2x18 0.9 Matt 77407-436
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSQ-E
Delivered with light source 830
1x26 0.9 Specular 77310-3
1x26 0.9 Matt 77312-3
2x18 0.9 Specular 77305-3
2x18 0.9 Matt 77307-3
Delivered with light source 840
1x26 0.9 Specular 77410-3
1x26 0.9 Matt 77412-3
2x18 0.9 Specular 77405-3
2x18 0.9 Matt 77407-3
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSQ-I
Delivered with light source 830
1x26 0.9 -3 and -1002 supplied with mains cable and earthed plug, RKK 3x0,75mm², L=2,5 m. -303 supplied with mains cable Wieland GST 18i, male, L=3,0 m. Specular 77310-1002
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSQ-E
Delivered with light source 830
1x26 0.9 Wieland GST18i5 (5-way). Outlet socket Specular 77310-322
1x26 0.9 Wieland GST18i5 (5-way). Outlet socket Matt 77312-322
2x18 0.9 Wieland GST18i5 (5-way). Outlet socket Specular 77305-322
2x18 0.9 Wieland GST18i5 (5-way). Outlet socket Matt 77307-322
Delivered with light source 840
1x26 0.9 Wieland GST18i5 (5-way). Outlet socket Specular 77410-322
1x26 0.9 Wieland GST18i5 (5-way). Outlet socket Matt 77412-322
2x18 0.9 Wieland GST18i5 (5-way). Outlet socket Specular 77405-322
2x18 0.9 Wieland GST18i5 (5-way). Outlet socket Matt 77407-322
Text som beskriver tabellen
W Weight, kg Comment Reflector Art.No.
FSQ-E
Delivered with light source 830
1x26 0.9 Specular 77310-111
1x26 0.9 Matt 77312-111
2x18 0.9 Specular 77305-111
2x18 0.9 Matt 77307-111
Delivered with light source 840
1x26 0.9 Specular 77410-111
1x26 0.9 Matt 77412-111
2x18 0.9 Specular 77405-111
2x18 0.9 Matt 77407-111

Assembly plate

For assembly in soft tile ceilings. Stable cardboard. The cardboard has cut-outs to suit all diameters.

Art.No.
Assembly plate 41956

Cilindriq rills

Opal structured shade with grooves in the opening and white Edge ring III.

Art.No.
Ø 205 mm, white (RAL 9016) 41936

Compact fluorescent lamp FSQ-E

4-limb, 4-pin, short

Art.No.
18, 3000, G24q-2, Ra>80, 1200, 66 81222
26, 3000, G24q-3, Ra>80, 1800, 69 81223

Compact fluorescent lamp FSQ-E

4-limb, 4-pin, short

Art.No.
18, 4000, G24q-2, Ra>80, 1200, 66 81435
26, 4000, G24q-3, Ra>80, 1800, 69 81436

Compact Fluorscent Lamp FSQ-I

Art.No.
18, 3000, G24d-2, Ra>80, 1200, 66 81256
26, 3000, G24d-3, Ra>80, 1800, 69 81257

Contra

Grey finished cross louvre with intensive coloured centre cone and grey Edge ring III.
Matt reflector recommended.

Art.No.
Ø 205 mm, blue 41881
Ø 205 mm, aqua 41884
Ø 205 mm, green 41887
Ø 205 mm, alu 41890

Cover plate clear IP 64

This accessory consists of Edge ring III and a clear polycarbonate disc.

Art.No.
Ø 205 mm, white (RAL 9016) 41841
Ø 205 mm, grey (RAL 9006) 41845
Ø 205 mm, matt aluminium 41849

Cover plate Delta IP 20

This accessory consists of Edge ring III and a microprism disc in clear acrylic. We recommend Pleiad Soft or Pleiad Evo for best visual expression.

Art.No.
Ø 205 mm, white (RAL 9016) 42032
Ø 205 mm, grey (RAL 9006) 42036
Ø 205 mm, matt aluminium 42040

Cover plate opal IP 54

This accessory consists of Edge ring III and an opal polycarbonate disc.

Art.No.
Ø 205 mm, white (RAL 9016) 41861
Ø 205 mm, grey (RAL 9006) 41865
Ø 205 mm, matt aluminium 41869

Edge ring II

The edge ring hides the lower edge of the reflector and is attached with a bayonet fixing. White or grey plastic or matt brushed aluminium surface.

Art.No.
Ø 205 mm, white (RAL 9016) 41901
Ø 205 mm, grey (RAL 7040) 41905
Ø 205 mm, matt aluminium 41909

Edge ring III

The edge ring hides the lower edge of the reflector and is attached with a bayonet fixing. White or grey plastic or matt brushed aluminium surface.

Art.No.
Ø 205 mm, white (RAL 9016) 41921
Ø 205 mm, grey (RAL 7040) 41925
Ø 205 mm, matt aluminium 41929

Ice

Sandblasted glass ring to be attached to the luminaires edge ring.

Art.No.
Ø 205 41316

IP 21 cover

Cover of alu-zinc increases the luminaire's enclosure class to IP 21.

Art.No.
Ø 205 mm 41701

Opus

Opal structured shade and white Edge ring II. Matt reflector recommended.

Art.No.
Ø 205 mm, white (RAL 9016) 41746

Plain

Blasted glass décor. Suspended on the reflector with the help of three wire clips and white Edge ring III.
Matt reflector recommended.

Art.No.
Ø 205 mm 41696

Recess panel

Fits panel ceilings 100- and 200-modules. Assembly plates supplied. Manufactured of white finished (RAL 9016) sheet steel.

Art.No.
Ø 205 mm 41776

Ring

Opal or coloured ring and white Edge ring III. Matt reflector recommended.

Art.No.
Ø 205 mm, blue 41971
Ø 205 mm, green 41977
Ø 205 mm, opal 41980

Ringlight

The Ringlight unit is attached to the luminaire's edge ring with a bayonet fixing. Designed without visible screws. Two blasted glass rings with matt brushed aluminium edge ring or white finished sheet steel.
Matt reflector recommended.

Art.No.
Ø 205 mm, white (RAL 9016) 41751
Ø 205 mm, blasted glass 41755

Support

For assembly in soft tile ceilings. Consists of an assembly plate and support bars. The support's profile is adapted for 600 and 625-module.

Art.No.
600 mm 41958
625 mm 41959
Dimensions picture
2x18 W, matt

2x18 W, matt

2x18 W, specular

2x18 W, specular

1x26 W, specular

1x26 W, specular

1x26 W, matt

1x26 W, matt

Contact us

Contact us